State

SCPI Command :

CALCulate<n>:LIMit<li>:ACPower:GAP<gap>:MANual:LOWer:ABSolute:STATe

class StateCls

State commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(sb_gaps: RsFsw.enums.SubBlockGaps, window=Window.Default, limitIx=LimitIx.Default, gapChannel=GapChannel.Default) → bool

# SCPI: CALCulate<n>:LIMit<li>:ACPower:GAP<gap>:MANual:LOWer:ABSolute:STATe
value: bool = driver.calculate.limit.acPower.gap.manual.lower.absolute.state.get(sb_gaps = enums.SubBlockGaps.AB, window = repcap.Window.Default, limitIx = repcap.LimitIx.Default, gapChannel = repcap.GapChannel.Default)

Turns the absolute limit check for the specified lower gap (CACLR) channel on and off. You have to activate the general ACLR limit check before using this command with method RsFsw.Calculate.Limit.AcPower.State.set. Is only available for for asymmetrical (manual) configuration of gap channels (see [SENSe:]POWer:ACHannel:GAP<gap>:MODE) .

param sb_gaps

AB | BC | CD | DE | EF | FG | GH Name of the gap, defined by the letters of the surrounding sub blocks (e.g. ‘AB’ for the gap between sub blocks A and B) .

param window

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Calculate’)

param limitIx

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Limit’)

param gapChannel

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Gap’)

return

state: ON | OFF | 0 | 1 OFF | 0 Switches the function off ON | 1 Switches the function on

set(sb_gaps: RsFsw.enums.SubBlockGaps, state: bool, window=Window.Default, limitIx=LimitIx.Default, gapChannel=GapChannel.Default) → None

# SCPI: CALCulate<n>:LIMit<li>:ACPower:GAP<gap>:MANual:LOWer:ABSolute:STATe
driver.calculate.limit.acPower.gap.manual.lower.absolute.state.set(sb_gaps = enums.SubBlockGaps.AB, state = False, window = repcap.Window.Default, limitIx = repcap.LimitIx.Default, gapChannel = repcap.GapChannel.Default)

Turns the absolute limit check for the specified lower gap (CACLR) channel on and off. You have to activate the general ACLR limit check before using this command with method RsFsw.Calculate.Limit.AcPower.State.set. Is only available for for asymmetrical (manual) configuration of gap channels (see [SENSe:]POWer:ACHannel:GAP<gap>:MODE) .

param sb_gaps

AB | BC | CD | DE | EF | FG | GH Name of the gap, defined by the letters of the surrounding sub blocks (e.g. ‘AB’ for the gap between sub blocks A and B) .

param state

ON | OFF | 0 | 1 OFF | 0 Switches the function off ON | 1 Switches the function on

param window

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Calculate’)

param limitIx

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Limit’)

param gapChannel

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Gap’)