Start

SCPI Command :

CONFigure:PSWeep:Y:STARt

class StartCls

Start commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get() → float

# SCPI: CONFigure:PSWeep:Y:STARt
value: float = driver.applications.k18AmplifierEt.configure.psweep.y.start.get()

This command defines the start value for the second parameter controlled by the parameter sweep.

return

start: numeric value whose unit depends on the parameter type you have selected with method RsFsw.Applications.K18_AmplifierEt.Configure.Psweep.Y.Setting.set: - Hz in case of the center frequency - dBm in case of the output level - s in case of the delay between envelope and RF signal - V in case of the envelope bias

set(start: float) → None

# SCPI: CONFigure:PSWeep:Y:STARt
driver.applications.k18AmplifierEt.configure.psweep.y.start.set(start = 1.0)

This command defines the start value for the second parameter controlled by the parameter sweep.

param start

numeric value whose unit depends on the parameter type you have selected with method RsFsw.Applications.K18_AmplifierEt.Configure.Psweep.Y.Setting.set: - Hz in case of the center frequency - dBm in case of the output level - s in case of the delay between envelope and RF signal - V in case of the envelope bias