Settings

SCPI Command :

CONFigure:SETTings

class SettingsCls

Settings commands group definition. 1 total commands, 0 Subgroups, 1 group commands

set() → None

# SCPI: CONFigure:SETTings
driver.applications.k18AmplifierEt.configure.settings.set()

This command transfers the current generator configuration into the amplifier application. Make sure to synchronize with *OPC? or *WAI to make sure that the command was successfully applied on the generator before sending the next command.

set_with_opc(opc_timeout_ms: int = - 1) → None

# SCPI: CONFigure:SETTings
driver.applications.k18AmplifierEt.configure.settings.set_with_opc()

This command transfers the current generator configuration into the amplifier application. Make sure to synchronize with *OPC? or *WAI to make sure that the command was successfully applied on the generator before sending the next command.

Same as set, but waits for the operation to complete before continuing further. Use the RsFsw.utilities.opc_timeout_set() to set the timeout value.

param opc_timeout_ms

Maximum time to wait in milliseconds, valid only for this call.