Count

SCPI Command :

CALCulate<n>:MARKer<m>:COUNt

class CountCls

Count commands group definition. 3 total commands, 2 Subgroups, 1 group commands

get(window=Window.Default, marker=Marker.Default) → bool

# SCPI: CALCulate<n>:MARKer<m>:COUNt
value: bool = driver.applications.k14Xnr5G.calculate.marker.count.get(window = repcap.Window.Default, marker = repcap.Marker.Default)

Turns the frequency counter at the marker position on and off. The frequency counter works for one marker only. If you perform a frequency count with another marker, the FSW deactivates the frequency count of the first marker. To get a valid result, you have to perform a complete measurement with synchronization to the end of the measurement before reading out the result. This is only possible for single sweep mode. See also method RsFsw.Applications.K10x_Lte. Initiate.Continuous.set.

param window

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Calculate’)

param marker

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Marker’)

return

state: ON | OFF | 0 | 1 OFF | 0 Switches the function off ON | 1 Switches the function on

set(state: bool, window=Window.Default, marker=Marker.Default) → None

# SCPI: CALCulate<n>:MARKer<m>:COUNt
driver.applications.k14Xnr5G.calculate.marker.count.set(state = False, window = repcap.Window.Default, marker = repcap.Marker.Default)

Turns the frequency counter at the marker position on and off. The frequency counter works for one marker only. If you perform a frequency count with another marker, the FSW deactivates the frequency count of the first marker. To get a valid result, you have to perform a complete measurement with synchronization to the end of the measurement before reading out the result. This is only possible for single sweep mode. See also method RsFsw.Applications.K10x_Lte. Initiate.Continuous.set.

param state

ON | OFF | 0 | 1 OFF | 0 Switches the function off ON | 1 Switches the function on

param window

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Calculate’)

param marker

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Marker’)

Cloning the Group

# Create a clone of the original group, that exists independently
group2 = driver.applications.k14Xnr5G.calculate.marker.count.clone()

Subgroups

• Frequency
• Resolution