Y

SCPI Command :

CALCulate<n>:MARKer<m>:Y
Commands in total: 1
Subgroups: 0
Direct child commands: 1
get(window=Window.Default, marker=Marker.Default) → float[source]
# CALCulate<n>:MARKer<m>:Y
value: float = driver.applications.k14Xnr5G.calculate.marker.y.get(window = repcap.Window.Default, marker = repcap.Marker.Default)

Queries the position of a marker on the y-axis. In result displays with a third aspect (for example ‘EVM vs Symbol x Carrier’) , you can also use the command to define the position of the marker on the y-axis. If necessary, the command activates the marker first. To get a valid result, you have to perform a complete measurement with synchronization to the end of the measurement before reading out the result. This is only possible for single measurement mode. See also method RsFsw.applications.k10Xlte.initiate.continuous.set() .

Parameters:

  • window – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Calculate’)

  • marker – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Marker’)

Returns:

result: numeric value Result at the marker position. The type of value and its unit depend on the selected result display.

set(result: float, window=Window.Default, marker=Marker.Default) → None[source]
# CALCulate<n>:MARKer<m>:Y
driver.applications.k14Xnr5G.calculate.marker.y.set(result = 1.0, window = repcap.Window.Default, marker = repcap.Marker.Default)

Queries the position of a marker on the y-axis. In result displays with a third aspect (for example ‘EVM vs Symbol x Carrier’) , you can also use the command to define the position of the marker on the y-axis. If necessary, the command activates the marker first. To get a valid result, you have to perform a complete measurement with synchronization to the end of the measurement before reading out the result. This is only possible for single measurement mode. See also method RsFsw.applications.k10Xlte.initiate.continuous.set() .

Parameters:

  • result – numeric value Result at the marker position. The type of value and its unit depend on the selected result display.

  • window – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Calculate’)

  • marker – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Marker’)