Apply

SCPI Command :

[SOURce<HW>]:REGenerator:SIMulation:LEVel:APPLy

Commands in total: 1
Subgroups: 0
Direct child commands: 1

set() → None[source]

# [SOURce<HW>]:REGenerator:SIMulation:LEVel:APPLy
driver.source.regenerator.simulation.level.apply.set()

Sets the output level at the dedicated connector to the calculated level. To query the calculated level, use the command method RsSmw.source.regenerator.simulation.level.get() .

set_with_opc(opc_timeout_ms: int = -1) → None[source]

# [SOURce<HW>]:REGenerator:SIMulation:LEVel:APPLy
driver.source.regenerator.simulation.level.apply.set_with_opc()

Sets the output level at the dedicated connector to the calculated level. To query the calculated level, use the command method RsSmw.source.regenerator.simulation.level.get() .

Same as set, but waits for the operation to complete before continuing further. Use the RsSmw.utilities.opc_timeout_set() to set the timeout value.

Parameters:: opc_timeout_ms – Maximum time to wait in milliseconds, valid only for this call.