Apply

SCPI Command :

[SOURce<HW>]:REGenerator:RADar:ANALyzer:POWer:APPLy

class ApplyCls

Apply commands group definition. 1 total commands, 0 Subgroups, 1 group commands

set() → None

# SCPI: [SOURce<HW>]:REGenerator:RADar:ANALyzer:POWer:APPLy
driver.source.regenerator.radar.analyzer.power.apply.set()

Sets the referenece level of the analyzer. The command can be used only if a R&S FSW is connected to the R&S SMW.

set_with_opc(opc_timeout_ms: int = - 1) → None

# SCPI: [SOURce<HW>]:REGenerator:RADar:ANALyzer:POWer:APPLy
driver.source.regenerator.radar.analyzer.power.apply.set_with_opc()

Sets the referenece level of the analyzer. The command can be used only if a R&S FSW is connected to the R&S SMW.

Same as set, but waits for the operation to complete before continuing further. Use the RsSmw.utilities.opc_timeout_set() to set the timeout value.

param opc_timeout_ms

Maximum time to wait in milliseconds, valid only for this call.