Read

SCPI Command :

[SOURce<HW>]:BB:W3GPp:MSTation<ST>:DPCCh:TPC:READ

Commands in total: 1
Subgroups: 0
Direct child commands: 1

get(mobileStation=MobileStation.Default) → TpcReadMode[source]

# [SOURce<HW>]:BB:W3GPp:MSTation<ST>:DPCCh:TPC:READ
value: enums.TpcReadMode = driver.source.bb.w3Gpp.mstation.dpcch.tpc.read.get(mobileStation = repcap.MobileStation.Default)

The command sets the read out mode for the bit pattern of the TPC field of the DPCCH. The bit pattern is selected with the command SOUR:BB:W3GPp:MST:DPCC:TPC:DATA:PATT.

Parameters:: mobileStation – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Mstation’)
Returns:: read: CONTinuous | S0A | S1A | S01A | S10A CONTinuous The bit pattern is used cyclically. S0A The bit pattern is used once, then the TPC sequence continues with 0 bits. S1A The bit pattern is used once, then the TPC sequence continues with 1 bit. S01A The bit pattern is used once and then the TPC sequence is continued with 0 bits and 1 bit alternately (in multiples, depending on by the symbol rate, for example, 00001111) . S10A The bit pattern is used once and then the TPC sequence is continued with 1 bit and 0 bits alternately (in multiples, depending on by the symbol rate, for example, 11110000) .

set(read: TpcReadMode, mobileStation=MobileStation.Default) → None[source]

# [SOURce<HW>]:BB:W3GPp:MSTation<ST>:DPCCh:TPC:READ
driver.source.bb.w3Gpp.mstation.dpcch.tpc.read.set(read = enums.TpcReadMode.CONTinuous, mobileStation = repcap.MobileStation.Default)

The command sets the read out mode for the bit pattern of the TPC field of the DPCCH. The bit pattern is selected with the command SOUR:BB:W3GPp:MST:DPCC:TPC:DATA:PATT.

Parameters:

read – CONTinuous | S0A | S1A | S01A | S10A CONTinuous The bit pattern is used cyclically. S0A The bit pattern is used once, then the TPC sequence continues with 0 bits. S1A The bit pattern is used once, then the TPC sequence continues with 1 bit. S01A The bit pattern is used once and then the TPC sequence is continued with 0 bits and 1 bit alternately (in multiples, depending on by the symbol rate, for example, 00001111) . S10A The bit pattern is used once and then the TPC sequence is continued with 1 bit and 0 bits alternately (in multiples, depending on by the symbol rate, for example, 11110000) .
mobileStation – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Mstation’)