PonNack

SCPI Command :

[SOURce<HW>]:BB:W3GPp:MSTation<ST>:DPCCh:HS:MIMO:PONNack

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get(mobileStation=MobileStation.Default) → float

# [SOURce<HW>]:BB:W3GPp:MSTation<ST>:DPCCh:HS:MIMO:PONNack
value: float = driver.source.bb.w3Gpp.mstation.dpcch.hs.mimo.ponNack.get(mobileStation = repcap.MobileStation.Default)

(up to Release 7) Sets the power offset Poff_NACK/NACK of an NACK/NACK response to two scheduled transport blocks relative to the CQI Power PCQI (method RsSmw.source.bb.w3Gpp.mstation.dpcch.hs.power.set() ) . The power PNACK/NACK used during the HARQ-ACK slots is calculated as: PNACK/NACK = PCQI + Poff_NACK/NACK

Parameters:

mobileStation – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Mstation’)

Returns:

pon_nack: float Range: -10 to 10

set(pon_nack: float, mobileStation=MobileStation.Default) → None

# [SOURce<HW>]:BB:W3GPp:MSTation<ST>:DPCCh:HS:MIMO:PONNack
driver.source.bb.w3Gpp.mstation.dpcch.hs.mimo.ponNack.set(pon_nack = 1.0, mobileStation = repcap.MobileStation.Default)

(up to Release 7) Sets the power offset Poff_NACK/NACK of an NACK/NACK response to two scheduled transport blocks relative to the CQI Power PCQI (method RsSmw.source.bb.w3Gpp.mstation.dpcch.hs.power.set() ) . The power PNACK/NACK used during the HARQ-ACK slots is calculated as: PNACK/NACK = PCQI + Poff_NACK/NACK

Parameters:

• pon_nack – float Range: -10 to 10

• mobileStation – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Mstation’)