Rtfb

SCPI Commands :

[SOURce<HW>]:BB:V5G:UL:RTFB:AACK
[SOURce<HW>]:BB:V5G:UL:RTFB:ACKDefinition
[SOURce<HW>]:BB:V5G:UL:RTFB:ADUDelay
[SOURce<HW>]:BB:V5G:UL:RTFB:BBSelector
[SOURce<HW>]:BB:V5G:UL:RTFB:BEINsertion
[SOURce<HW>]:BB:V5G:UL:RTFB:BERate
[SOURce<HW>]:BB:V5G:UL:RTFB:CONNector
[SOURce<HW>]:BB:V5G:UL:RTFB:DMODe
[SOURce<HW>]:BB:V5G:UL:RTFB:GENReports
[SOURce<HW>]:BB:V5G:UL:RTFB:ITADvance
[SOURce<HW>]:BB:V5G:UL:RTFB:LOFFset
[SOURce<HW>]:BB:V5G:UL:RTFB:MAXTrans
[SOURce<HW>]:BB:V5G:UL:RTFB:MODE
[SOURce<HW>]:BB:V5G:UL:RTFB:RVSequence
[SOURce<HW>]:BB:V5G:UL:RTFB:SERate

class RtfbCls[source]

Rtfb commands group definition. 15 total commands, 0 Subgroups, 15 group commands

get_aack() → bool[source]

# SCPI: [SOURce<HW>]:BB:V5G:UL:RTFB:AACK
value: bool = driver.source.bb.v5G.uplink.rtfb.get_aack()

No command help available

return:

assume_ack: No help available

get_ack_definition() → LowHigh[source]

# SCPI: [SOURce<HW>]:BB:V5G:UL:RTFB:ACKDefinition
value: enums.LowHigh = driver.source.bb.v5G.uplink.rtfb.get_ack_definition()

No command help available

return:

ack_definition: No help available

get_adu_delay() → float[source]

# SCPI: [SOURce<HW>]:BB:V5G:UL:RTFB:ADUDelay
value: float = driver.source.bb.v5G.uplink.rtfb.get_adu_delay()

No command help available

return:

add_user_delay: No help available

get_bb_selector() → int[source]

# SCPI: [SOURce<HW>]:BB:V5G:UL:RTFB:BBSelector
value: int = driver.source.bb.v5G.uplink.rtfb.get_bb_selector()

No command help available

return:

baseband_select: No help available

get_be_insertion() → FeedbackBlerMode[source]

# SCPI: [SOURce<HW>]:BB:V5G:UL:RTFB:BEINsertion
value: enums.FeedbackBlerMode = driver.source.bb.v5G.uplink.rtfb.get_be_insertion()

No command help available

return:

block_err_insert: No help available

get_bit_error_rate() → float[source]

# SCPI: [SOURce<HW>]:BB:V5G:UL:RTFB:BERate
value: float = driver.source.bb.v5G.uplink.rtfb.get_bit_error_rate()

No command help available

return:

block_err_rate: No help available

get_connector() → FeedbackConnector[source]

# SCPI: [SOURce<HW>]:BB:V5G:UL:RTFB:CONNector
value: enums.FeedbackConnector = driver.source.bb.v5G.uplink.rtfb.get_connector()

No command help available

return:

connector: No help available

get_dmode() → FeedbackDistMode[source]

# SCPI: [SOURce<HW>]:BB:V5G:UL:RTFB:DMODe
value: enums.FeedbackDistMode = driver.source.bb.v5G.uplink.rtfb.get_dmode()

No command help available

return:

distance_mode: No help available

get_gen_reports() → bool[source]

# SCPI: [SOURce<HW>]:BB:V5G:UL:RTFB:GENReports
value: bool = driver.source.bb.v5G.uplink.rtfb.get_gen_reports()

No command help available

return:

gen_debug_reports: No help available

get_it_advance() → int[source]

# SCPI: [SOURce<HW>]:BB:V5G:UL:RTFB:ITADvance
value: int = driver.source.bb.v5G.uplink.rtfb.get_it_advance()

No command help available

return:

init_tim_advance: No help available

get_loffset() → int[source]

# SCPI: [SOURce<HW>]:BB:V5G:UL:RTFB:LOFFset
value: int = driver.source.bb.v5G.uplink.rtfb.get_loffset()

No command help available

return:

logging_offset: No help available

get_max_trans() → int[source]

# SCPI: [SOURce<HW>]:BB:V5G:UL:RTFB:MAXTrans
value: int = driver.source.bb.v5G.uplink.rtfb.get_max_trans()

No command help available

return:

max_transmission: No help available

get_mode() → FeedbackMode[source]

# SCPI: [SOURce<HW>]:BB:V5G:UL:RTFB:MODE
value: enums.FeedbackMode = driver.source.bb.v5G.uplink.rtfb.get_mode()

No command help available

return:

mode: No help available

get_rv_sequence() → str[source]

# SCPI: [SOURce<HW>]:BB:V5G:UL:RTFB:RVSequence
value: str = driver.source.bb.v5G.uplink.rtfb.get_rv_sequence()

No command help available

return:

red_vers_sequence: No help available

get_ser_rte() → EutraSerialRate[source]

# SCPI: [SOURce<HW>]:BB:V5G:UL:RTFB:SERate
value: enums.EutraSerialRate = driver.source.bb.v5G.uplink.rtfb.get_ser_rte()

No command help available

return:

serial_rate: No help available

set_aack(assume_ack: bool) → None[source]

# SCPI: [SOURce<HW>]:BB:V5G:UL:RTFB:AACK
driver.source.bb.v5G.uplink.rtfb.set_aack(assume_ack = False)

No command help available

param assume_ack:

No help available

set_ack_definition(ack_definition: LowHigh) → None[source]

# SCPI: [SOURce<HW>]:BB:V5G:UL:RTFB:ACKDefinition
driver.source.bb.v5G.uplink.rtfb.set_ack_definition(ack_definition = enums.LowHigh.HIGH)

No command help available

param ack_definition:

No help available

set_adu_delay(add_user_delay: float) → None[source]

# SCPI: [SOURce<HW>]:BB:V5G:UL:RTFB:ADUDelay
driver.source.bb.v5G.uplink.rtfb.set_adu_delay(add_user_delay = 1.0)

No command help available

param add_user_delay:

No help available

set_bb_selector(baseband_select: int) → None[source]

# SCPI: [SOURce<HW>]:BB:V5G:UL:RTFB:BBSelector
driver.source.bb.v5G.uplink.rtfb.set_bb_selector(baseband_select = 1)

No command help available

param baseband_select:

No help available

set_be_insertion(block_err_insert: FeedbackBlerMode) → None[source]

# SCPI: [SOURce<HW>]:BB:V5G:UL:RTFB:BEINsertion
driver.source.bb.v5G.uplink.rtfb.set_be_insertion(block_err_insert = enums.FeedbackBlerMode.APRocesses)

No command help available

param block_err_insert:

No help available

set_bit_error_rate(block_err_rate: float) → None[source]

# SCPI: [SOURce<HW>]:BB:V5G:UL:RTFB:BERate
driver.source.bb.v5G.uplink.rtfb.set_bit_error_rate(block_err_rate = 1.0)

No command help available

param block_err_rate:

No help available

set_connector(connector: FeedbackConnector) → None[source]

# SCPI: [SOURce<HW>]:BB:V5G:UL:RTFB:CONNector
driver.source.bb.v5G.uplink.rtfb.set_connector(connector = enums.FeedbackConnector.GLOBal)

No command help available

param connector:

No help available

set_dmode(distance_mode: FeedbackDistMode) → None[source]

# SCPI: [SOURce<HW>]:BB:V5G:UL:RTFB:DMODe
driver.source.bb.v5G.uplink.rtfb.set_dmode(distance_mode = enums.FeedbackDistMode.DIRect)

No command help available

param distance_mode:

No help available

set_gen_reports(gen_debug_reports: bool) → None[source]

# SCPI: [SOURce<HW>]:BB:V5G:UL:RTFB:GENReports
driver.source.bb.v5G.uplink.rtfb.set_gen_reports(gen_debug_reports = False)

No command help available

param gen_debug_reports:

No help available

set_it_advance(init_tim_advance: int) → None[source]

# SCPI: [SOURce<HW>]:BB:V5G:UL:RTFB:ITADvance
driver.source.bb.v5G.uplink.rtfb.set_it_advance(init_tim_advance = 1)

No command help available

param init_tim_advance:

No help available

set_loffset(logging_offset: int) → None[source]

# SCPI: [SOURce<HW>]:BB:V5G:UL:RTFB:LOFFset
driver.source.bb.v5G.uplink.rtfb.set_loffset(logging_offset = 1)

No command help available

param logging_offset:

No help available

set_max_trans(max_transmission: int) → None[source]

# SCPI: [SOURce<HW>]:BB:V5G:UL:RTFB:MAXTrans
driver.source.bb.v5G.uplink.rtfb.set_max_trans(max_transmission = 1)

No command help available

param max_transmission:

No help available

set_mode(mode: FeedbackMode) → None[source]

# SCPI: [SOURce<HW>]:BB:V5G:UL:RTFB:MODE
driver.source.bb.v5G.uplink.rtfb.set_mode(mode = enums.FeedbackMode.BAN)

No command help available

param mode:

No help available

set_rv_sequence(red_vers_sequence: str) → None[source]

# SCPI: [SOURce<HW>]:BB:V5G:UL:RTFB:RVSequence
driver.source.bb.v5G.uplink.rtfb.set_rv_sequence(red_vers_sequence = 'abc')

No command help available

param red_vers_sequence:

No help available

set_ser_rte(serial_rate: EutraSerialRate) → None[source]

# SCPI: [SOURce<HW>]:BB:V5G:UL:RTFB:SERate
driver.source.bb.v5G.uplink.rtfb.set_ser_rte(serial_rate = enums.EutraSerialRate.SR1_6M)

No command help available

param serial_rate:

No help available