External

SCPI Commands :

[SOURce<HW>]:BB:ARBitrary:TRIGger:[EXTernal]:DELay
[SOURce<HW>]:BB:ARBitrary:TRIGger:[EXTernal]:INHibit
[SOURce<HW>]:BB:ARBitrary:TRIGger:[EXTernal]:RDELay
[SOURce<HW>]:BB:ARBitrary:TRIGger:[EXTernal]:TDELay

class ExternalCls

External commands group definition. 5 total commands, 1 Subgroups, 4 group commands

get_delay() → float

# SCPI: [SOURce<HW>]:BB:ARBitrary:TRIGger:[EXTernal]:DELay
value: float = driver.source.bb.arbitrary.trigger.external.get_delay()

Specifies the trigger delay in samples. Maximum trigger delay and trigger inhibit values depend on the installed options. See ‘To set delay and inhibit values’.

return:

delay: float Range: 0 to depends on the sample rate, Unit: sample E.g., 0 to 2147483647 samples (R&S SMW-B10)

get_inhibit() → int

# SCPI: [SOURce<HW>]:BB:ARBitrary:TRIGger:[EXTernal]:INHibit
value: int = driver.source.bb.arbitrary.trigger.external.get_inhibit()

Sets the number of samples that inhibit a restart of the signal generation. Maximum trigger delay and trigger inhibit values depend on the installed options. See ‘To set delay and inhibit values’.

return:

inhibit: integer Range: 0 to 21.47 * (clock frequency) , Unit: samples E.g., 0 to 2147483647 samples (R&S SMW-B10)

get_rdelay() → float

# SCPI: [SOURce<HW>]:BB:ARBitrary:TRIGger:[EXTernal]:RDELay
value: float = driver.source.bb.arbitrary.trigger.external.get_rdelay()

Queries the time (in seconds) an external trigger event is delayed for.

return:

res_time_delay_sec: float Range: 0 to 688

get_tdelay() → float

# SCPI: [SOURce<HW>]:BB:ARBitrary:TRIGger:[EXTernal]:TDELay
value: float = driver.source.bb.arbitrary.trigger.external.get_tdelay()

Specifies the trigger delay for external triggering. The value affects all external trigger signals. Maximum trigger delay and trigger inhibit values depend on the installed options. See ‘To set delay and inhibit values’.

return:

ext_time_delay: float Range: 0 to 2147483647 / (clock frequency) , Unit: s

set_delay(delay: float) → None

# SCPI: [SOURce<HW>]:BB:ARBitrary:TRIGger:[EXTernal]:DELay
driver.source.bb.arbitrary.trigger.external.set_delay(delay = 1.0)

Specifies the trigger delay in samples. Maximum trigger delay and trigger inhibit values depend on the installed options. See ‘To set delay and inhibit values’.

param delay:

float Range: 0 to depends on the sample rate, Unit: sample E.g., 0 to 2147483647 samples (R&S SMW-B10)

set_inhibit(inhibit: int) → None

# SCPI: [SOURce<HW>]:BB:ARBitrary:TRIGger:[EXTernal]:INHibit
driver.source.bb.arbitrary.trigger.external.set_inhibit(inhibit = 1)

Sets the number of samples that inhibit a restart of the signal generation. Maximum trigger delay and trigger inhibit values depend on the installed options. See ‘To set delay and inhibit values’.

param inhibit:

integer Range: 0 to 21.47 * (clock frequency) , Unit: samples E.g., 0 to 2147483647 samples (R&S SMW-B10)

set_tdelay(ext_time_delay: float) → None

# SCPI: [SOURce<HW>]:BB:ARBitrary:TRIGger:[EXTernal]:TDELay
driver.source.bb.arbitrary.trigger.external.set_tdelay(ext_time_delay = 1.0)

Specifies the trigger delay for external triggering. The value affects all external trigger signals. Maximum trigger delay and trigger inhibit values depend on the installed options. See ‘To set delay and inhibit values’.

param ext_time_delay:

float Range: 0 to 2147483647 / (clock frequency) , Unit: s

Cloning the Group

# Create a clone of the original group, that exists independently
group2 = driver.source.bb.arbitrary.trigger.external.clone()

Subgroups

• Synchronize