Phase

SCPI Commands :

[SOURce<HW>]:BB:ARBitrary:MCARrier:EDIT:CARRier:PHASe:STEP
[SOURce<HW>]:BB:ARBitrary:MCARrier:EDIT:CARRier:PHASe:[STARt]
Commands in total: 2
Subgroups: 0
Direct child commands: 2
get_start() → float[source]
# [SOURce<HW>]:BB:ARBitrary:MCARrier:EDIT:CARRier:PHASe:[STARt]
value: float = driver.source.bb.arbitrary.mcarrier.edit.carrier.phase.get_start()

Sets the start phase for the individual carriers in the defined carrier range.

Returns:

start: float Range: 0 to 359.99, Unit: DEG

get_step() → float[source]
# [SOURce<HW>]:BB:ARBitrary:MCARrier:EDIT:CARRier:PHASe:STEP
value: float = driver.source.bb.arbitrary.mcarrier.edit.carrier.phase.get_step()

Sets the step width by which the start phases of the carriers in the defined carrier range is incremented.

Returns:

step: float Range: -359.99 to 359.99, Unit: DEG

set_start(start: float) → None[source]
# [SOURce<HW>]:BB:ARBitrary:MCARrier:EDIT:CARRier:PHASe:[STARt]
driver.source.bb.arbitrary.mcarrier.edit.carrier.phase.set_start(start = 1.0)

Sets the start phase for the individual carriers in the defined carrier range.

Parameters:

start – float Range: 0 to 359.99, Unit: DEG

set_step(step: float) → None[source]
# [SOURce<HW>]:BB:ARBitrary:MCARrier:EDIT:CARRier:PHASe:STEP
driver.source.bb.arbitrary.mcarrier.edit.carrier.phase.set_step(step = 1.0)

Sets the step width by which the start phases of the carriers in the defined carrier range is incremented.

Parameters:

step – float Range: -359.99 to 359.99, Unit: DEG