Signal

SCPI Command :

OUTPut<HW>:TM<CH>:SIGNal

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get(tmConnector=TmConnector.Default) → OutpConnBbSignal

# OUTPut<HW>:TM<CH>:SIGNal
value: enums.OutpConnBbSignal = driver.output.tm.signal.get(tmConnector = repcap.TmConnector.Default)

Determines the control signal that is output at the selected connector. To define the connector direction, use the command method RsSmw.output.tm.direction.set() .

Parameters:

tmConnector – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Tm’)

Returns:

signal: MARKA1 | MARKA2 | MARKA3 | SCLA | LATTA | BGATA | HOPA | CWMODA | TRIGA | MARKB1 | MARKB2 | MARKB3 | SCLB | LATTB | BGATB | HOPB | CWMODB | TRIGB | MARKC1 | MARKC2 | MARKC3 | SCLC | LATTC | BGATC | HOPC | CWMODC | TRIGC | MARKD1 | MARKD2 | MARKD3 | SCLD | LATTD | BGATD | HOPD | CWMODD | TRIGD MARKA1 | MARKC1 | MARKA2 | MARKC2|(MARKA3 | MARKC3) = Baseband A/C Marker 1/2/(3) SCLA | SCLB | SCLC | SCLD = Symbol Clock A/B/C/D Option:R&S SMW-B10 LATTA | LATTB | LATTC | LATTD = Lev Att A/B/C/D BGATA | BGATB | BGATC | BGATD = Burst Gate A/B/C/D HOPA | HOPB | HOPC | HOPD = HOP A/B/C/D CWMODA | CWMODB | CWMODC | CWMODD = CW/Mod A/B/C/D TRIGA | TRIGB | TRIGC | TRIGD = Triggered A The character A/B/C/D in the parameter value indicates the baseband the signal is related to.

set(signal: OutpConnBbSignal, tmConnector=TmConnector.Default) → None

# OUTPut<HW>:TM<CH>:SIGNal
driver.output.tm.signal.set(signal = enums.OutpConnBbSignal.BGATA, tmConnector = repcap.TmConnector.Default)

Determines the control signal that is output at the selected connector. To define the connector direction, use the command method RsSmw.output.tm.direction.set() .

Parameters:

• signal – MARKA1 | MARKA2 | MARKA3 | SCLA | LATTA | BGATA | HOPA | CWMODA | TRIGA | MARKB1 | MARKB2 | MARKB3 | SCLB | LATTB | BGATB | HOPB | CWMODB | TRIGB | MARKC1 | MARKC2 | MARKC3 | SCLC | LATTC | BGATC | HOPC | CWMODC | TRIGC | MARKD1 | MARKD2 | MARKD3 | SCLD | LATTD | BGATD | HOPD | CWMODD | TRIGD MARKA1 | MARKC1 | MARKA2 | MARKC2|(MARKA3 | MARKC3) = Baseband A/C Marker 1/2/(3) SCLA | SCLB | SCLC | SCLD = Symbol Clock A/B/C/D Option:R&S SMW-B10 LATTA | LATTB | LATTC | LATTD = Lev Att A/B/C/D BGATA | BGATB | BGATC | BGATD = Burst Gate A/B/C/D HOPA | HOPB | HOPC | HOPD = HOP A/B/C/D CWMODA | CWMODB | CWMODC | CWMODD = CW/Mod A/B/C/D TRIGA | TRIGB | TRIGC | TRIGD = Triggered A The character A/B/C/D in the parameter value indicates the baseband the signal is related to.

• tmConnector – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Tm’)