Source:Bb:Wlad:Clipping#
SCPI Commands
- [SOURce<HW>]:BB:WLAD:CLIPping:LEVel
- [SOURce<HW>]:BB:WLAD:CLIPping:MODE
- [SOURce<HW>]:BB:WLAD:CLIPping:STATe
Direct SCPI Members
- int Level#
// SCPI: [SOURce<HW>]:BB:WLAD:CLIPping:LEVel int value = driver.Source.Bb.Wlad.Clipping.Level; driver.Source.Bb.Wlad.Clipping.Level = 1;Sets the limit for level clipping. This value indicates at what point the signal is clipped. It is specified as a percentage, relative to the highest level. 100% indicates that clipping does not take place. Level clipping is activated with the command SOUR:BB:WLAD:CLIP:STAT ON.
level: integer
- ClipModeEnum Mode#
// SCPI: [SOURce<HW>]:BB:WLAD:CLIPping:MODE ClipModeEnum value = driver.Source.Bb.Wlad.Clipping.Mode; driver.Source.Bb.Wlad.Clipping.Mode = ClipModeEnum.SCALar;Sets the method for level clipping.
mode: VECTor | SCALar
VECTor: The reference level is the amplitude i+jq.
SCALar: The reference level is the absolute maximum of the I and Q values.
- bool State#
// SCPI: [SOURce<HW>]:BB:WLAD:CLIPping:STATe bool value = driver.Source.Bb.Wlad.Clipping.State; driver.Source.Bb.Wlad.Clipping.State = false;Activates level clipping.
state: 1 | ON | 0| OFF