Source:Bb:W3Gpp:Mstation:Hsupa:Dpcch:E:Frc:Data#
SCPI Commands
- [SOURce<HW>]:BB:W3GPp:MSTation<ST>:[HSUPa]:DPCCh:E:FRC:DATA
Cloning the Group
// Create a clone of the original group, that exists independently
var data2 = driver.Source.Bb.W3Gpp.Mstation.Hsupa.Dpcch.E.Frc.Data.Clone();
Direct SCPI Members
- DataSourceAenum Get ( )#
- DataSourceAenum Get ( MobileStationRepCap mobileStation )
- void Set ( DataSourceAenum data )#
- void Set ( DataSourceAenum data, MobileStationRepCap mobileStation )
// SCPI: [SOURce<HW>]:BB:W3GPp:MSTation<ST>:[HSUPa]:DPCCh:E:FRC:DATA // Get: DataSourceAenum value = driver.Source.Bb.W3Gpp.Mstation.Hsupa.Dpcch.E.Frc.Data.Get(); DataSourceAenum value = driver.Source.Bb.W3Gpp.Mstation.Hsupa.Dpcch.E.Frc.Data.Get(MobileStationRepCap.Default); // Set: driver.Source.Bb.W3Gpp.Mstation.Hsupa.Dpcch.E.Frc.Data.Set(DataSourceAenum.DLISt, MobileStationRepCap.Default); driver.Source.Bb.W3Gpp.Mstation.Hsupa.Dpcch.E.Frc.Data.Set(DataSourceAenum.DLISt);
Selects the data source for the E-DCH channels, i.e. this parameter affects the corresponding parameter of the E-DPDCH.
dataPN9 | PN11 | PN15 | PN16 | PN20 | PN21 | PN23 | DLISt | ZERO | ONE | PATTernPNxx: The pseudo-random sequence generator is used as the data source. Different random sequence lengths can be selected.
DLISt: A data list is used. The data list is selected with the command [:SOURcehw]:BB:W3GPp:MSTationst[:HSUPa]:DPCCh:E:FRC:DATA:DSELect.
ZERO | ONE: Internal 0 and 1 data is used.
PATTern: Internal data is used. The bit pattern for the data is defined by the command [:SOURcehw]:BB:W3GPp:MSTationst[:HSUPa]:DPCCh:E:FRC:DATA:PATTern. The maximum length is 64 bits.
mobileStationRepeated capability selectorWhen you do not use any explicit repeated capability selector, the value is taken from its parent group.
Subgroups