Source:Bb:W3Gpp:Bstation:Enhanced:Channel:Dpch:DpControl:Direction#

SCPI Commands

[SOURce<HW>]:BB:W3GPp:BSTation:ENHanced:CHANnel<CH0>:DPCH:DPControl:DIRection

Direct SCPI Members

UpDownDirectionEnum Get ( )#
UpDownDirectionEnum Get ( ChannelNullRepCap channelNull )
void Set ( UpDownDirectionEnum direction )#
void Set ( UpDownDirectionEnum direction, ChannelNullRepCap channelNull )
// SCPI: [SOURce<HW>]:BB:W3GPp:BSTation:ENHanced:CHANnel<CH0>:DPCH:DPControl:DIRection
// Get:
UpDownDirectionEnum value = driver.Source.Bb.W3Gpp.Bstation.Enhanced.Channel.Dpch.DpControl.Direction.Get();
UpDownDirectionEnum value = driver.Source.Bb.W3Gpp.Bstation.Enhanced.Channel.Dpch.DpControl.Direction.Get(ChannelNullRepCap.Default);
// Set:
driver.Source.Bb.W3Gpp.Bstation.Enhanced.Channel.Dpch.DpControl.Direction.Set(UpDownDirectionEnum.DOWN, ChannelNullRepCap.Default);
driver.Source.Bb.W3Gpp.Bstation.Enhanced.Channel.Dpch.DpControl.Direction.Set(UpDownDirectionEnum.DOWN);

The command selects the Dynamic Power Control direction. The selected mode determines if the channel power is increased (UP) or decreased (DOWN) by a control signal with high level.

direction UP | DOWN

channelNull Repeated capability selector

When you do not use any explicit repeated capability selector, the value is taken from its parent group.