Source:Bb:W3Gpp:Bstation:Channel:Hsdpa:Hset:RvParameter<IndexRepCap>#
RepCap Settings
// Range: Nr1 .. Nr64
var rc = driver.Source.Bb.W3Gpp.Bstation.Channel.Hsdpa.Hset.RvParameter.RepCapIndex;
driver.Source.Bb.W3Gpp.Bstation.Channel.Hsdpa.Hset.RvParameter.RepCapIndex = IndexRepCap.Nr1;
SCPI Commands
- [SOURce<HW>]:BB:W3GPp:BSTation<ST>:CHANnel<CH0>:HSDPa:HSET:RVParameter<DI>
Cloning the Group
// Create a clone of the original group, that exists independently
var rvParameter2 = driver.Source.Bb.W3Gpp.Bstation.Channel.Hsdpa.Hset.RvParameter.Clone();
Direct SCPI Members
- int Get ( )
- int Get ( BaseStationRepCap baseStation, ChannelNullRepCap channelNull, IndexRepCap index )
- void Set ( int rvParameter )
- void Set ( int rvParameter, BaseStationRepCap baseStation, ChannelNullRepCap channelNull, IndexRepCap index )
// SCPI: [SOURce<HW>]:BB:W3GPp:BSTation<ST>:CHANnel<CH0>:HSDPa:HSET:RVParameter<DI> // Get: int value = driver.Source.Bb.W3Gpp.Bstation.Channel.Hsdpa.Hset.RvParameter.Get(); int value = driver.Source.Bb.W3Gpp.Bstation.Channel.Hsdpa.Hset.RvParameter.Get(BaseStationRepCap.Default, ChannelNullRepCap.Default, IndexRepCap.Default); // Set: driver.Source.Bb.W3Gpp.Bstation.Channel.Hsdpa.Hset.RvParameter.Set(1, BaseStationRepCap.Default, ChannelNullRepCap.Default, IndexRepCap.Default); driver.Source.Bb.W3Gpp.Bstation.Channel.Hsdpa.Hset.RvParameter.Set(1);
The parameter is enabled for HARQ Simulation Mode set to Constant ACK. The command sets the Redundancy Version Parameter. This value determines the processing of the Forward Error Correction and Constellation Arrangement (QAM16 and 64QAM modulation) , see TS 25.212 4.6.2. For HS-SCCH Type 2 (less operation) , the Redundancy Version Parameter is always 0.
rvParameterintegerbaseStationRepeated capability selectorchannelNullRepeated capability selectorindexRepeated capability selectorWhen you do not use any explicit repeated capability selector, the value is taken from its parent group.