Source:Bb:W3Gpp:Bstation:Channel:Dpcch:Tpc:Read#
SCPI Commands
- [SOURce<HW>]:BB:W3GPp:BSTation<ST>:CHANnel<CH0>:DPCCh:TPC:READ
Direct SCPI Members
- TpcReadModeEnum Get ( )#
- TpcReadModeEnum Get ( BaseStationRepCap baseStation, ChannelNullRepCap channelNull )
- void Set ( TpcReadModeEnum read )#
- void Set ( TpcReadModeEnum read, BaseStationRepCap baseStation, ChannelNullRepCap channelNull )
// SCPI: [SOURce<HW>]:BB:W3GPp:BSTation<ST>:CHANnel<CH0>:DPCCh:TPC:READ // Get: TpcReadModeEnum value = driver.Source.Bb.W3Gpp.Bstation.Channel.Dpcch.Tpc.Read.Get(); TpcReadModeEnum value = driver.Source.Bb.W3Gpp.Bstation.Channel.Dpcch.Tpc.Read.Get(BaseStationRepCap.Default, ChannelNullRepCap.Default); // Set: driver.Source.Bb.W3Gpp.Bstation.Channel.Dpcch.Tpc.Read.Set(TpcReadModeEnum.CONTinuous, BaseStationRepCap.Default, ChannelNullRepCap.Default); driver.Source.Bb.W3Gpp.Bstation.Channel.Dpcch.Tpc.Read.Set(TpcReadModeEnum.CONTinuous);
The command sets the read out mode for the bit pattern of the TPC field. The bit pattern is defined with the commands BB:W3GPp:BST<i>:CHANnel<n>:DPCCh:TPC….
readCONTinuous | S0A | S1A | S01A | S10ACONTinuous: The bit pattern is used cyclically.
S0A: The bit pattern is used once, then the TPC sequence continues with 0 bits.
S1A: The bit pattern is used once, then the TPC sequence continues with 1 bit.
S01A: The bit pattern is used once and then the TPC sequence is continued with 0 bits and 1 bit alternately (in multiples, depending on by the symbol rate, for example, 00001111) .
S10A: The bit pattern is used once and then the TPC sequence is continued with 1 bit and 0 bits alternately (in multiples, depending on by the symbol rate, for example, 11110000) .
baseStationRepeated capability selectorchannelNullRepeated capability selectorWhen you do not use any explicit repeated capability selector, the value is taken from its parent group.