Source:Bb:W3Gpp:Bstation:Channel:Dpcch:Tfci:State#
SCPI Commands
- [SOURce<HW>]:BB:W3GPp:BSTation<ST>:CHANnel<CH0>:DPCCh:TFCI:STATe
Direct SCPI Members
- bool Get ( )#
- bool Get ( BaseStationRepCap baseStation, ChannelNullRepCap channelNull )
- void Set ( bool state )#
- void Set ( bool state, BaseStationRepCap baseStation, ChannelNullRepCap channelNull )
// SCPI: [SOURce<HW>]:BB:W3GPp:BSTation<ST>:CHANnel<CH0>:DPCCh:TFCI:STATe // Get: bool value = driver.Source.Bb.W3Gpp.Bstation.Channel.Dpcch.Tfci.State.Get(); bool value = driver.Source.Bb.W3Gpp.Bstation.Channel.Dpcch.Tfci.State.Get(BaseStationRepCap.Default, ChannelNullRepCap.Default); // Set: driver.Source.Bb.W3Gpp.Bstation.Channel.Dpcch.Tfci.State.Set(false, BaseStationRepCap.Default, ChannelNullRepCap.Default); driver.Source.Bb.W3Gpp.Bstation.Channel.Dpcch.Tfci.State.Set(false);
The command activates the TFCI field (Transport Format Combination Identifier) for the selected channel of the specified base station. The slot format determines the symbol rate (and thus the range of values for the channelization code) , the TFCI state and the pilot length. If the value of any one of the four parameters is changed, all the other parameters are adapted as necessary. In the case of enhanced channels with active channel coding, the selected channel coding also affects the slot format and thus the remaining parameters. If these parameters are changed, the channel coding type is set to user.
stateON | OFFbaseStationRepeated capability selectorchannelNullRepeated capability selectorWhen you do not use any explicit repeated capability selector, the value is taken from its parent group.