Source:Bb:W3Gpp:Bstation:Channel:Dpcch:Plength#
SCPI Commands
- [SOURce<HW>]:BB:W3GPp:BSTation<ST>:CHANnel<CH0>:DPCCh:PLENgth
Direct SCPI Members
- PilLenEnum Get ( )#
- PilLenEnum Get ( BaseStationRepCap baseStation, ChannelNullRepCap channelNull )
- void Set ( PilLenEnum plength )#
- void Set ( PilLenEnum plength, BaseStationRepCap baseStation, ChannelNullRepCap channelNull )
// SCPI: [SOURce<HW>]:BB:W3GPp:BSTation<ST>:CHANnel<CH0>:DPCCh:PLENgth // Get: PilLenEnum value = driver.Source.Bb.W3Gpp.Bstation.Channel.Dpcch.Plength.Get(); PilLenEnum value = driver.Source.Bb.W3Gpp.Bstation.Channel.Dpcch.Plength.Get(BaseStationRepCap.Default, ChannelNullRepCap.Default); // Set: driver.Source.Bb.W3Gpp.Bstation.Channel.Dpcch.Plength.Set(PilLenEnum.BIT0, BaseStationRepCap.Default, ChannelNullRepCap.Default); driver.Source.Bb.W3Gpp.Bstation.Channel.Dpcch.Plength.Set(PilLenEnum.BIT0);
Sets the length of the pilot fields. The range of values for this parameter depends on the channel type and the symbol rate. The slot format determines the symbol rate (and thus the range of values for the channelization code) , the TFCI state and the pilot length. If the value of any one of the four parameters is changed, all the other parameters are adapted as necessary. In the case of enhanced channels with active channel coding, the selected channel coding also affects the slot format and thus the remaining parameters. If these parameters are changed, the channel coding type is set to user.
plengthBIT2 | BIT4 | BIT8 | BIT16 | BIT0baseStationRepeated capability selectorchannelNullRepeated capability selectorWhen you do not use any explicit repeated capability selector, the value is taken from its parent group.