Source:Bb:Tdscdma:Up:Pparameter:Dpch#

SCPI Commands

[SOURce<HW>]:BB:TDSCdma:UP:PPARameter:DPCH:COUNt
[SOURce<HW>]:BB:TDSCdma:UP:PPARameter:DPCH:CRESt
[SOURce<HW>]:BB:TDSCdma:UP:PPARameter:DPCH:SFACtor

Direct SCPI Members

int Count#
// SCPI: [SOURce<HW>]:BB:TDSCdma:UP:PPARameter:DPCH:COUNt
int value = driver.Source.Bb.Tdscdma.Up.Pparameter.Dpch.Count;
driver.Source.Bb.Tdscdma.Up.Pparameter.Dpch.Count = 1;

Sets the number of activated DPCHs. The maximum number depends on the spreading factor: Max. No. DPCH = 3 x Spreading Factor

count: integer


CresFactModeEnum Crest#
// SCPI: [SOURce<HW>]:BB:TDSCdma:UP:PPARameter:DPCH:CRESt
CresFactModeEnum value = driver.Source.Bb.Tdscdma.Up.Pparameter.Dpch.Crest;
driver.Source.Bb.Tdscdma.Up.Pparameter.Dpch.Crest = CresFactModeEnum.AVERage;

Selects the desired range for the crest factor of the test scenario.

crest: MINimum | AVERage | WORSt

  • MINimum: The crest factor is minimized.The channelization codes are distributed uniformly over the code domain. The timing offsets are increased by 3 per channel.

  • AVERage: An average crest factor is set.The channelization codes are distributed uniformly over the code domain. The timing offsets are all set to 0.

  • WORSt: The crest factor is set to an unfavorable value (i.e. maximum) .The channelization codes are assigned in ascending order. The timing offsets are all set to 0.


TdscdmaSpreadFactorEnum Sfactor#
// SCPI: [SOURce<HW>]:BB:TDSCdma:UP:PPARameter:DPCH:SFACtor
TdscdmaSpreadFactorEnum value = driver.Source.Bb.Tdscdma.Up.Pparameter.Dpch.Sfactor;
driver.Source.Bb.Tdscdma.Up.Pparameter.Dpch.Sfactor = TdscdmaSpreadFactorEnum._1;

Sets the spreading factor for the DPCHs.

sfactor: 1 | 2| 4 | 8| 16