Source:Bb:Tdscdma#
SCPI Commands
- [SOURce<HW>]:BB:TDSCdma:LINK
- [SOURce<HW>]:BB:TDSCdma:PRESet
- [SOURce<HW>]:BB:TDSCdma:RESet
- [SOURce<HW>]:BB:TDSCdma:SLENgth
- [SOURce<HW>]:BB:TDSCdma:STATe
- [SOURce<HW>]:BB:TDSCdma:VERSion
Cloning the Group
// Create a clone of the original group, that exists independently
var tdscdma2 = driver.Source.Bb.Tdscdma.Clone();
Direct SCPI Members
- LinkDirEnum Link#
// SCPI: [SOURce<HW>]:BB:TDSCdma:LINK LinkDirEnum value = driver.Source.Bb.Tdscdma.Link; driver.Source.Bb.Tdscdma.Link = LinkDirEnum.DOWN;Defines the transmission direction.
link: FORWard | DOWN | REVerse | UP
- void Preset ( )#
- void PresetAndWait ( )#
- void PresetAndWait ( int opcTimeoutMs )
// SCPI: [SOURce<HW>]:BB:TDSCdma:PRESet driver.Source.Bb.Tdscdma.Preset(); driver.Source.Bb.Tdscdma.PresetAndWait(); driver.Source.Bb.Tdscdma.PresetAndWait(1000);Sets the parameters of the digital standard to their default values (*RST values specified for the commands) . Not affected is the state set with the command SOURce<hw>:BB:TDSCdma:STATe.
PresetAndWait is the same as Preset, but waits for the operation to complete. The optional entered opcTimeoutMs is only valid for this call. If you omit the opcTimeoutMs, the method uses the settable value
RsSmw.Utilities.OpcTimeout.
- void Reset ( )#
- void ResetAndWait ( )#
- void ResetAndWait ( int opcTimeoutMs )
// SCPI: [SOURce<HW>]:BB:TDSCdma:RESet driver.Source.Bb.Tdscdma.Reset(); driver.Source.Bb.Tdscdma.ResetAndWait(); driver.Source.Bb.Tdscdma.ResetAndWait(1000);Resets all cells to the predefined settings. The reset applies to the selected link direction. An overview is provided by table in “Set to Default”.
ResetAndWait is the same as Reset, but waits for the operation to complete. The optional entered opcTimeoutMs is only valid for this call. If you omit the opcTimeoutMs, the method uses the settable value
RsSmw.Utilities.OpcTimeout.
- int Slength#
// SCPI: [SOURce<HW>]:BB:TDSCdma:SLENgth int value = driver.Source.Bb.Tdscdma.Slength; driver.Source.Bb.Tdscdma.Slength = 1;Sets the sequence length of the arbitrary waveform component of the TD-SCDMA signal in the number of frames. This component is calculated in advance and output in the arbitrary waveform generator. It is added to the realtime signal components.
slength: integer
- bool State#
// SCPI: [SOURce<HW>]:BB:TDSCdma:STATe bool value = driver.Source.Bb.Tdscdma.State; driver.Source.Bb.Tdscdma.State = false;Activates the standard and deactivates all the other digital standards and digital modulation modes in the same path.
state: 1 | ON | 0| OFF
- string Version#
// SCPI: [SOURce<HW>]:BB:TDSCdma:VERSion string value = driver.Source.Bb.Tdscdma.Version;Queries the version of the TD-SCDMA standard underlying the definitions.
version: string
Subgroups