Source:Bb:Tdscdma:Pramp#

SCPI Commands

[SOURce<HW>]:BB:TDSCdma:PRAMp:BBONly
[SOURce<HW>]:BB:TDSCdma:PRAMp:FDELay
[SOURce<HW>]:BB:TDSCdma:PRAMp:RDELay
[SOURce<HW>]:BB:TDSCdma:PRAMp:SHAPe
[SOURce<HW>]:BB:TDSCdma:PRAMp:TIME

Direct SCPI Members

bool BbOnly#
// SCPI: [SOURce<HW>]:BB:TDSCdma:PRAMp:BBONly
bool value = driver.Source.Bb.Tdscdma.Pramp.BbOnly;

Activates or deactivates power ramping for the baseband signals.

bbOnly: 1 | ON | 0| OFF


int Fdelay#
// SCPI: [SOURce<HW>]:BB:TDSCdma:PRAMp:FDELay
int value = driver.Source.Bb.Tdscdma.Pramp.Fdelay;
driver.Source.Bb.Tdscdma.Pramp.Fdelay = 1;

Sets the offset in the falling edge of the envelope at the end of a burst. A positive value delays the ramp and a negative value causes an advance.


int Rdelay#
// SCPI: [SOURce<HW>]:BB:TDSCdma:PRAMp:RDELay
int value = driver.Source.Bb.Tdscdma.Pramp.Rdelay;
driver.Source.Bb.Tdscdma.Pramp.Rdelay = 1;

Sets the offset in the falling edge of the envelope at the end of a burst. A positive value delays the ramp and a negative value causes an advance.

rdelay: integer


RampFuncEnum Shape#
// SCPI: [SOURce<HW>]:BB:TDSCdma:PRAMp:SHAPe
RampFuncEnum value = driver.Source.Bb.Tdscdma.Pramp.Shape;
driver.Source.Bb.Tdscdma.Pramp.Shape = RampFuncEnum.COSine;

Selects the form of the transmitted power, i.e. the shape of the rising and falling edges during power ramp control.

shape: LINear | COSine


int Time#
// SCPI: [SOURce<HW>]:BB:TDSCdma:PRAMp:TIME
int value = driver.Source.Bb.Tdscdma.Pramp.Time;
driver.Source.Bb.Tdscdma.Pramp.Time = 1;

Sets the power ramping rise time and fall time for a burst.

time: integer