Source:Bb:Tdscdma:Down:Cell:Enh:Dch:Dcch:Data#
SCPI Commands
- [SOURce<HW>]:BB:TDSCdma:DOWN:CELL<ST>:ENH:DCH:DCCH:DATA
Cloning the Group
// Create a clone of the original group, that exists independently
var data2 = driver.Source.Bb.Tdscdma.Down.Cell.Enh.Dch.Dcch.Data.Clone();
Direct SCPI Members
- DataSourceAenum Get ( )#
- DataSourceAenum Get ( CellRepCap cell )
- void Set ( DataSourceAenum data )#
- void Set ( DataSourceAenum data, CellRepCap cell )
// SCPI: [SOURce<HW>]:BB:TDSCdma:DOWN:CELL<ST>:ENH:DCH:DCCH:DATA // Get: DataSourceAenum value = driver.Source.Bb.Tdscdma.Down.Cell.Enh.Dch.Dcch.Data.Get(); DataSourceAenum value = driver.Source.Bb.Tdscdma.Down.Cell.Enh.Dch.Dcch.Data.Get(CellRepCap.Default); // Set: driver.Source.Bb.Tdscdma.Down.Cell.Enh.Dch.Dcch.Data.Set(DataSourceAenum.DLISt, CellRepCap.Default); driver.Source.Bb.Tdscdma.Down.Cell.Enh.Dch.Dcch.Data.Set(DataSourceAenum.DLISt);
The command selects the data source for the specified channel. For the traffic channels, this value is specific for the selected radio configuration.
dataPN9 | PN11 | PN15 | PN16 | PN20 | PN21 | PN23 | DLISt | ZERO | ONE | PATTernPNxx: PRBS data as per CCITT with period lengths between 29-1 and 223-1 is generated internally.
DLISt: Internal data from a programmable data list is used. The data list can be generated by the Data Editor or generated externally. Data lists are selected in the Select Data List field. The data list is selected with the commandBB:TDSC:DOWN:CELL1:ENH:BCH:DTCH:DATA:DSEL data list name.
ZERO | ONE: Internal 0 and 1 data is used.
PATTern: A user-definable bit pattern with a maximum length of 64 bits is generated internally. The bit pattern is defined in the Pattern entry field. The bit pattern is selected with the commandBB:TDSC:DOWN:CELL1:ENH:BCH:DTCH:DATA:PATT bit pattern.
cellRepeated capability selectorWhen you do not use any explicit repeated capability selector, the value is taken from its parent group.
Subgroups