Source:Bb:Oneweb#
SCPI Commands
- [SOURce<HW>]:BB:ONEWeb:CMOD
- [SOURce<HW>]:BB:ONEWeb:DUPLexing
- [SOURce<HW>]:BB:ONEWeb:LINK
- [SOURce<HW>]:BB:ONEWeb:PRESet
- [SOURce<HW>]:BB:ONEWeb:SLENgth
- [SOURce<HW>]:BB:ONEWeb:STATe
Cloning the Group
// Create a clone of the original group, that exists independently
var oneweb2 = driver.Source.Bb.Oneweb.Clone();
Direct SCPI Members
- OneWebConfModeEnum Cmod#
// SCPI: [SOURce<HW>]:BB:ONEWeb:CMOD OneWebConfModeEnum value = driver.Source.Bb.Oneweb.Cmod; driver.Source.Bb.Oneweb.Cmod = OneWebConfModeEnum.PREDefined;Sets the configuration mode.
configMode: PREDefined | USER
- OneWebDuplexModeRangeEnum Duplexing#
// SCPI: [SOURce<HW>]:BB:ONEWeb:DUPLexing OneWebDuplexModeRangeEnum value = driver.Source.Bb.Oneweb.Duplexing;Queries the duplexing mode.
duplexing: FDD
- UpDownDirectionEnum Link#
// SCPI: [SOURce<HW>]:BB:ONEWeb:LINK UpDownDirectionEnum value = driver.Source.Bb.Oneweb.Link; driver.Source.Bb.Oneweb.Link = UpDownDirectionEnum.DOWN;Sets the transmission direction.
link: UP | DOWN
- void Preset ( )#
- void PresetAndWait ( )#
- void PresetAndWait ( int opcTimeoutMs )
// SCPI: [SOURce<HW>]:BB:ONEWeb:PRESet driver.Source.Bb.Oneweb.Preset(); driver.Source.Bb.Oneweb.PresetAndWait(); driver.Source.Bb.Oneweb.PresetAndWait(1000);Sets the parameters of the digital standard to their default values (*RST values specified for the commands) . Not affected is the state set with the command SOURce<hw>:BB:ONEWeb:STATe.
PresetAndWait is the same as Preset, but waits for the operation to complete. The optional entered opcTimeoutMs is only valid for this call. If you omit the opcTimeoutMs, the method uses the settable value
RsSmw.Utilities.OpcTimeout.
- int Slength#
// SCPI: [SOURce<HW>]:BB:ONEWeb:SLENgth int value = driver.Source.Bb.Oneweb.Slength; driver.Source.Bb.Oneweb.Slength = 1;Sets the sequence length of the signal in number of frames. The signal is calculated in advance and output in the arbitrary waveform generator. The maximum number of frames is calculated as follows: Max. No. of Frames = Arbitrary waveform memory size/(sampling rate x 10 ms) .
slength: integer
- bool State#
// SCPI: [SOURce<HW>]:BB:ONEWeb:STATe bool value = driver.Source.Bb.Oneweb.State; driver.Source.Bb.Oneweb.State = false;Activates the standard.
oneWebState: 1 | ON | 0| OFF
Subgroups
- Source:Bb:Oneweb:Clipping
- Source:Bb:Oneweb:Clock
- Source:Bb:Oneweb:Downlink
- Source:Bb:Oneweb:Filter
- Source:Bb:Oneweb:Notch<NotchFilterRepCap>
- Source:Bb:Oneweb:Powc
- Source:Bb:Oneweb:RefSignal
- Source:Bb:Oneweb:Setting
- Source:Bb:Oneweb:SymbolRate
- Source:Bb:Oneweb:Tdw
- Source:Bb:Oneweb:Trigger
- Source:Bb:Oneweb:Udt
- Source:Bb:Oneweb:Uplink
- Source:Bb:Oneweb:Waveform