Source:Bb:Nr5G:Tcw:Is#

SCPI Commands

[SOURce<HW>]:BB:NR5G:TCW:IS:BAND
[SOURce<HW>]:BB:NR5G:TCW:IS:CHBW
[SOURce<HW>]:BB:NR5G:TCW:IS:CLID
[SOURce<HW>]:BB:NR5G:TCW:IS:DISTance
[SOURce<HW>]:BB:NR5G:TCW:IS:DUPLex
[SOURce<HW>]:BB:NR5G:TCW:IS:FRSHift
[SOURce<HW>]:BB:NR5G:TCW:IS:IFTYpe
[SOURce<HW>]:BB:NR5G:TCW:IS:NRBLock
[SOURce<HW>]:BB:NR5G:TCW:IS:OFN
[SOURce<HW>]:BB:NR5G:TCW:IS:PLEVel
[SOURce<HW>]:BB:NR5G:TCW:IS:RBCFrequency
[SOURce<HW>]:BB:NR5G:TCW:IS:RBOFfset
[SOURce<HW>]:BB:NR5G:TCW:IS:RFFRequency
[SOURce<HW>]:BB:NR5G:TCW:IS:SCSPacing
[SOURce<HW>]:BB:NR5G:TCW:IS:TMODel
[SOURce<HW>]:BB:NR5G:TCW:IS:TREQuire
[SOURce<HW>]:BB:NR5G:TCW:IS:UEID

Direct SCPI Members

BandEnum Band#
// SCPI: [SOURce<HW>]:BB:NR5G:TCW:IS:BAND
BandEnum value = driver.Source.Bb.Nr5G.Tcw.Is.Band;
driver.Source.Bb.Nr5G.Tcw.Is.Band = BandEnum.N1;

Set the frequency band (n1 to n86) for the interfering signal.

band: N1 | N2 | N3 | N5 | N7 | N8 | N12 | N20 | N25 | N28 | N34 | N38 | N39 | N40 | N41 | N50 | N51 | N66 | N70 | N71 | N74 | N75 | N76 | N77 | N78 | N79 | N80 | N81 | N82 | N83 | N84 | N86


Nr5GcbwEnum Chbw#
// SCPI: [SOURce<HW>]:BB:NR5G:TCW:IS:CHBW
Nr5GcbwEnum value = driver.Source.Bb.Nr5G.Tcw.Is.Chbw;

Queries the channel bandwidth of the interfering signal.

ischBw: BW3 | BW5 | BW10 | BW15 | BW20 | BW25 | BW30 | BW35 | BW40 | BW45 | BW50 | BW60 | BW70 | BW80 | BW90 | BW100 | BW200 | BW400 | BW800 | BW1600 | BW2000


int Clid#
// SCPI: [SOURce<HW>]:BB:NR5G:TCW:IS:CLID
int value = driver.Source.Bb.Nr5G.Tcw.Is.Clid;
driver.Source.Bb.Nr5G.Tcw.Is.Clid = 1;

Sets the cell ID of the interfering signal.

isCellId: integer


int Distance#
// SCPI: [SOURce<HW>]:BB:NR5G:TCW:IS:DISTance
int value = driver.Source.Bb.Nr5G.Tcw.Is.Distance;
driver.Source.Bb.Nr5G.Tcw.Is.Distance = 1;

Sets the distance between the test object and test antenna injecting the interferer signal.

distance: integer


EutraDuplexModeEnum Duplex#
// SCPI: [SOURce<HW>]:BB:NR5G:TCW:IS:DUPLex
EutraDuplexModeEnum value = driver.Source.Bb.Nr5G.Tcw.Is.Duplex;
driver.Source.Bb.Nr5G.Tcw.Is.Duplex = EutraDuplexModeEnum.FDD;

The duplexing mechanism used for the interfering signal can be switched between FDD and TDD.

isDuplexing: FDD | TDD


FreqShiftEnum FrShift#
// SCPI: [SOURce<HW>]:BB:NR5G:TCW:IS:FRSHift
FreqShiftEnum value = driver.Source.Bb.Nr5G.Tcw.Is.FrShift;
driver.Source.Bb.Nr5G.Tcw.Is.FrShift = FreqShiftEnum.FS0;

Sets the parameter Frequency Shift m for the interfering signal. With this setting, the allocated RB can be offset to a different center frequency.

isFreqShift: FS0 | FS1 | FS2 | FS3 | FS4 | FS9 | FS14 | FS19 | FS24 | FS29 | FS54 | FS79 | FS99


InterfererTypeNrEnum IfType#
// SCPI: [SOURce<HW>]:BB:NR5G:TCW:IS:IFTYpe
InterfererTypeNrEnum value = driver.Source.Bb.Nr5G.Tcw.Is.IfType;
driver.Source.Bb.Nr5G.Tcw.Is.IfType = InterfererTypeNrEnum.CW;

Selects the type of the interfering signal:

  • For out-of-band blocking tests, the interfering signal is fixed, set to a CW signal. (CW)

  • For receiver intermodulation tests, the first interfering signal can be an 5G NR signal (NR) or narrow-band 5G NR signal (NNR) .

interfererType1: NR | NNR | CW


int Nrblock#
// SCPI: [SOURce<HW>]:BB:NR5G:TCW:IS:NRBLock
int value = driver.Source.Bb.Nr5G.Tcw.Is.Nrblock;

Queries the No. of resource blocks of the interfering signal.

isNumRb: integer


OffsetFactorNenum Ofn#
// SCPI: [SOURce<HW>]:BB:NR5G:TCW:IS:OFN
OffsetFactorNenum value = driver.Source.Bb.Nr5G.Tcw.Is.Ofn;
driver.Source.Bb.Nr5G.Tcw.Is.Ofn = OffsetFactorNenum.OFN_1;

Set the offset factor for the interfering signal.

offsetFactorN: OFN_1 | OFN_2 | OFN_3


double Plevel#
// SCPI: [SOURce<HW>]:BB:NR5G:TCW:IS:PLEVel
double value = driver.Source.Bb.Nr5G.Tcw.Is.Plevel;

Queries the power level of the interfering signal.

isPowLevel: float


int RbcFrequency#
// SCPI: [SOURce<HW>]:BB:NR5G:TCW:IS:RBCFrequency
int value = driver.Source.Bb.Nr5G.Tcw.Is.RbcFrequency;

Queries the center frequency of the interfering signal.

isRbCenterFreq: integer


int RbOffset#
// SCPI: [SOURce<HW>]:BB:NR5G:TCW:IS:RBOFfset
int value = driver.Source.Bb.Nr5G.Tcw.Is.RbOffset;
driver.Source.Bb.Nr5G.Tcw.Is.RbOffset = 1;

Sets the RB offset of the interfering signal.

isRbOffset: integer


int RfFrequency#
// SCPI: [SOURce<HW>]:BB:NR5G:TCW:IS:RFFRequency
int value = driver.Source.Bb.Nr5G.Tcw.Is.RfFrequency;
driver.Source.Bb.Nr5G.Tcw.Is.RfFrequency = 1;

Queries the center frequency of the interfering signal 1 and 2.

isRfFreq: integer


NumerologyEnum ScSpacing#
// SCPI: [SOURce<HW>]:BB:NR5G:TCW:IS:SCSPacing
NumerologyEnum value = driver.Source.Bb.Nr5G.Tcw.Is.ScSpacing;

Queries the sub-carrier spacing for the interfering signal.

isScs: N15 | N30 | N60 | X60 | N120 | N240 | N480 | N960

  • N15, N30, N60, N120, N240, N480, N960: Normal cyclic prefix, value in kHz

  • E60: Extended cyclic prefix, 60 kHz


TestModelEnum Tmodel#
// SCPI: [SOURce<HW>]:BB:NR5G:TCW:IS:TMODel
TestModelEnum value = driver.Source.Bb.Nr5G.Tcw.Is.Tmodel;

Shows the test model set for the test case. The NR-TMs for FR1 are defined in TS 38.141-1 section 4.9.2.

testModel: TM1_1


TestRequireEnum Trequire#
// SCPI: [SOURce<HW>]:BB:NR5G:TCW:IS:TREQuire
TestRequireEnum value = driver.Source.Bb.Nr5G.Tcw.Is.Trequire;
driver.Source.Bb.Nr5G.Tcw.Is.Trequire = TestRequireEnum.BLPE;

Selects whether the standard out-of-band blocking requirements test is performed (BLPE) or the optional blocking scenario, when the BS is co-located with another BS in a different operating band (COBS) .

isTestRequire: BLPE | COBS


int UeId#
// SCPI: [SOURce<HW>]:BB:NR5G:TCW:IS:UEID
int value = driver.Source.Bb.Nr5G.Tcw.Is.UeId;
driver.Source.Bb.Nr5G.Tcw.Is.UeId = 1;

Sets the UE ID/n_RNTI for the interfering signal.

isuEid: integer