Source:Bb:Nr5G:Output:CfReduction#

SCPI Commands

[SOURce<HW>]:BB:NR5G:OUTPut:CFReduction:ALGorithm
[SOURce<HW>]:BB:NR5G:OUTPut:CFReduction:CPBWidth
[SOURce<HW>]:BB:NR5G:OUTPut:CFReduction:ITERations
[SOURce<HW>]:BB:NR5G:OUTPut:CFReduction:OCFactor
[SOURce<HW>]:BB:NR5G:OUTPut:CFReduction:RCFactor
[SOURce<HW>]:BB:NR5G:OUTPut:CFReduction:STATe
[SOURce<HW>]:BB:NR5G:OUTPut:CFReduction:TCRFactor
[SOURce<HW>]:BB:NR5G:OUTPut:CFReduction:TRBWidth

Direct SCPI Members

CrestFactoralgorithmEnum Algorithm#
// SCPI: [SOURce<HW>]:BB:NR5G:OUTPut:CFReduction:ALGorithm
CrestFactoralgorithmEnum value = driver.Source.Bb.Nr5G.Output.CfReduction.Algorithm;

Selects the algorithm used for the crest factor reduction.

  • CLF: Clipping and filtering algorithm

  • PC: Peak cancellation algorithm


double CpBwidth#
// SCPI: [SOURce<HW>]:BB:NR5G:OUTPut:CFReduction:CPBWidth
double value = driver.Source.Bb.Nr5G.Output.CfReduction.CpBwidth;

Sets the bandwidth of the cancellation pulse. Prerequisites for this command

cancelPulseBw: float


int Iterations#
// SCPI: [SOURce<HW>]:BB:NR5G:OUTPut:CFReduction:ITERations
int value = driver.Source.Bb.Nr5G.Output.CfReduction.Iterations;

Sets the number of iterations that are used for calculating the resulting crest factor. The iteration process is stopped when the desired crest factor is achieved by 0.1 dB.

maxIteration: integer


int OcFactor#
// SCPI: [SOURce<HW>]:BB:NR5G:OUTPut:CFReduction:OCFactor
int value = driver.Source.Bb.Nr5G.Output.CfReduction.OcFactor;

Queries the original crest factor of the waveform after the calculation of the resulting crest factor is completed. The original crest factor is calculated as an average over the whole waveform, including any idle periods that might be present in TDD waveforms.

originalCfr: integer


int RcFactor#
// SCPI: [SOURce<HW>]:BB:NR5G:OUTPut:CFReduction:RCFactor
int value = driver.Source.Bb.Nr5G.Output.CfReduction.RcFactor;

Queries the resulting crest factor of the waveform after the calculations are completed. The resulting crest factor is calculated as an average over the whole waveform, including any idle periods that might be present in TDD waveforms.

resultingCfr: integer


bool State#
// SCPI: [SOURce<HW>]:BB:NR5G:OUTPut:CFReduction:STATe
bool value = driver.Source.Bb.Nr5G.Output.CfReduction.State;

Enables the crest factor reduction calculation.

crestFactorStat: 1 | ON | 0| OFF


double TcrFactor#
// SCPI: [SOURce<HW>]:BB:NR5G:OUTPut:CFReduction:TCRFactor
double value = driver.Source.Bb.Nr5G.Output.CfReduction.TcrFactor;

Sets the desired crest factor value.

targetCrf: float


double TrBwidth#
// SCPI: [SOURce<HW>]:BB:NR5G:OUTPut:CFReduction:TRBWidth
double value = driver.Source.Bb.Nr5G.Output.CfReduction.TrBwidth;

Sets the transition bandwidth of the cancellation pulse. Prerequisites for this command

transitBw: float