Source:Bb:Nr5G:Output#
SCPI Commands
- [SOURce<HW>]:BB:NR5G:OUTPut:ACLRopt
- [SOURce<HW>]:BB:NR5G:OUTPut:CLEVel
- [SOURce<HW>]:BB:NR5G:OUTPut:CMODe
- [SOURce<HW>]:BB:NR5G:OUTPut:FMODe
- [SOURce<HW>]:BB:NR5G:OUTPut:SAMRmode
- [SOURce<HW>]:BB:NR5G:OUTPut:SUSLen
Cloning the Group
// Create a clone of the original group, that exists independently
var output2 = driver.Source.Bb.Nr5G.Output.Clone();
Direct SCPI Members
- AclrModeEnum AclrOpt#
// SCPI: [SOURce<HW>]:BB:NR5G:OUTPut:ACLRopt AclrModeEnum value = driver.Source.Bb.Nr5G.Output.AclrOpt;No help available.
- int Clevel#
// SCPI: [SOURce<HW>]:BB:NR5G:OUTPut:CLEVel int value = driver.Source.Bb.Nr5G.Output.Clevel;Sets the limit for level clipping.
clippingLevel: integer
- ClipModeEnum Cmode#
// SCPI: [SOURce<HW>]:BB:NR5G:OUTPut:CMODe ClipModeEnum value = driver.Source.Bb.Nr5G.Output.Cmode;Sets the method for level clipping.
clippingMode: VECTor | SCALar
- FilterModeEnum Fmode#
// SCPI: [SOURce<HW>]:BB:NR5G:OUTPut:FMODe FilterModeEnum value = driver.Source.Bb.Nr5G.Output.Fmode;Defines if and how the filter is applied, on the whole channel bandwidth or on the individual BWPs separately.
filterBwp: CBW | BWP | OFF | FAST | 2| 1 | 0| USER | EVM | ALC
ALC: Applies a filter to each allocation.
BWP | 1: Applies a filter to each bandwidth part.
CBW | 0: Applies the channel BW filter.
EVM: Applies a filter to optimze the EVM.
FAST | 2: Applies fast filtering.
OFF: No filter.
USER: Applies a custom filter.
- SampRateModeRangeEnum SamrMode#
// SCPI: [SOURce<HW>]:BB:NR5G:OUTPut:SAMRmode SampRateModeRangeEnum value = driver.Source.Bb.Nr5G.Output.SamrMode;Sets the sample rate mode.
sampRateMode: MIN | FFT
- int Suslen#
// SCPI: [SOURce<HW>]:BB:NR5G:OUTPut:SUSLen int value = driver.Source.Bb.Nr5G.Output.Suslen;Sets the sequence length of the signal in terms of subframes.
Subgroups