Source:Bb:Lora:Impairments#

SCPI Commands

[SOURce<HW>]:BB:LORA:IMPairments:FDDeviation
[SOURce<HW>]:BB:LORA:IMPairments:FDRate
[SOURce<HW>]:BB:LORA:IMPairments:FDTYpe
[SOURce<HW>]:BB:LORA:IMPairments:FOFFset
[SOURce<HW>]:BB:LORA:IMPairments:STATe
[SOURce<HW>]:BB:LORA:IMPairments:STERror

Cloning the Group

// Create a clone of the original group, that exists independently
var impairments2 = driver.Source.Bb.Lora.Impairments.Clone();

Direct SCPI Members

int FdDeviation#
// SCPI: [SOURce<HW>]:BB:LORA:IMPairments:FDDeviation
int value = driver.Source.Bb.Lora.Impairments.FdDeviation;
driver.Source.Bb.Lora.Impairments.FdDeviation = 1;

Sets the frequency deviation of the frequency drift.

fdDeviation: integer


int FdRate#
// SCPI: [SOURce<HW>]:BB:LORA:IMPairments:FDRate
int value = driver.Source.Bb.Lora.Impairments.FdRate;
driver.Source.Bb.Lora.Impairments.FdRate = 1;

Sets the rate of the carrier frequency drift.

fdRate: integer


LoRaFreqDfTpEnum FdType#
// SCPI: [SOURce<HW>]:BB:LORA:IMPairments:FDTYpe
LoRaFreqDfTpEnum value = driver.Source.Bb.Lora.Impairments.FdType;
driver.Source.Bb.Lora.Impairments.FdType = LoRaFreqDfTpEnum.LINear;

Sets the frequency drift type.

fdType: LINear | SINE

  • LINear: Generation of frequency drift is set linear.

  • SINE: Generation of frequency drift is set sinusoid.


int Foffset#
// SCPI: [SOURce<HW>]:BB:LORA:IMPairments:FOFFset
int value = driver.Source.Bb.Lora.Impairments.Foffset;
driver.Source.Bb.Lora.Impairments.Foffset = 1;

Sets the frequency offset.

foffset: integer


bool State#
// SCPI: [SOURce<HW>]:BB:LORA:IMPairments:STATe
bool value = driver.Source.Bb.Lora.Impairments.State;
driver.Source.Bb.Lora.Impairments.State = false;

Activates impairments settings in the payload.

state: 1 | ON | 0| OFF


int StError#
// SCPI: [SOURce<HW>]:BB:LORA:IMPairments:STERror
int value = driver.Source.Bb.Lora.Impairments.StError;
driver.Source.Bb.Lora.Impairments.StError = 1;

Sets symbol timing error.

stError: integer


Subgroups