Source:Bb:Gbas#

SCPI Commands

[SOURce<HW>]:BB:GBAS:GPOW
[SOURce<HW>]:BB:GBAS:MFCHannels
[SOURce<HW>]:BB:GBAS:MODE
[SOURce<HW>]:BB:GBAS:NOFRames
[SOURce<HW>]:BB:GBAS:PRESet
[SOURce<HW>]:BB:GBAS:SCATi
[SOURce<HW>]:BB:GBAS:SRINfo
[SOURce<HW>]:BB:GBAS:STATe
[SOURce<HW>]:BB:GBAS:VERSion

Cloning the Group

// Create a clone of the original group, that exists independently
var gbas2 = driver.Source.Bb.Gbas.Clone();

Direct SCPI Members

bool Gpow#
// SCPI: [SOURce<HW>]:BB:GBAS:GPOW
bool value = driver.Source.Bb.Gbas.Gpow;
driver.Source.Bb.Gbas.Gpow = false;

Enables gated power mode.

gpow: 1 | ON | 0| OFF


bool MfChannels#
// SCPI: [SOURce<HW>]:BB:GBAS:MFCHannels
bool value = driver.Source.Bb.Gbas.MfChannels;
driver.Source.Bb.Gbas.MfChannels = false;

No help available.


ModeGbasEnum Mode#
// SCPI: [SOURce<HW>]:BB:GBAS:MODE
ModeGbasEnum value = driver.Source.Bb.Gbas.Mode;
driver.Source.Bb.Gbas.Mode = ModeGbasEnum.GBAS;

Sets the GBAS mode. Select between GBAS (LAAS) header information or SCAT-I header information.

scat: GBAS | SCAT


int NoFrames#
// SCPI: [SOURce<HW>]:BB:GBAS:NOFRames
int value = driver.Source.Bb.Gbas.NoFrames;

Queries the number of VDB frames.

noFrame: integer


void Preset ( )#
void PresetAndWait ( )#
void PresetAndWait ( int opcTimeoutMs )
// SCPI: [SOURce<HW>]:BB:GBAS:PRESet
driver.Source.Bb.Gbas.Preset();
driver.Source.Bb.Gbas.PresetAndWait();
driver.Source.Bb.Gbas.PresetAndWait(1000);

Sets the parameters of the digital standard to their default values (*RST values specified for the commands) . Not affected is the state set with the command SOURce<hw>:BB:GBAS:STATe.

PresetAndWait is the same as Preset, but waits for the operation to complete. The optional entered opcTimeoutMs is only valid for this call. If you omit the opcTimeoutMs, the method uses the settable value RsSmw.Utilities.OpcTimeout.


bool Scati#
// SCPI: [SOURce<HW>]:BB:GBAS:SCATi
bool value = driver.Source.Bb.Gbas.Scati;
driver.Source.Bb.Gbas.Scati = false;

No help available.


string SrInfo#
// SCPI: [SOURce<HW>]:BB:GBAS:SRINfo
string value = driver.Source.Bb.Gbas.SrInfo;

Queries the used sample rate.

srInfo: string


bool State#
// SCPI: [SOURce<HW>]:BB:GBAS:STATe
bool value = driver.Source.Bb.Gbas.State;
driver.Source.Bb.Gbas.State = false;

Activates the standard and deactivates all the other digital standards and digital modulation modes in the same path.

state: 1 | ON | 0| OFF


string Version#
// SCPI: [SOURce<HW>]:BB:GBAS:VERSion
string value = driver.Source.Bb.Gbas.Version;

Queries the GBAS specification version that corresponds to the set GBAS mode.

version: string


Subgroups