Source:Bb:Evdo:Anetwork:Rab#

SCPI Commands

[SOURce<HW>]:BB:EVDO:ANETwork:RAB:LENGth
[SOURce<HW>]:BB:EVDO:ANETwork:RAB:LEVel
[SOURce<HW>]:BB:EVDO:ANETwork:RAB:OFFSet
[SOURce<HW>]:BB:EVDO:ANETwork:RAB:STATe

Cloning the Group

// Create a clone of the original group, that exists independently
var rab2 = driver.Source.Bb.Evdo.Anetwork.Rab.Clone();

Direct SCPI Members

EvdoRabLenEnum Length#
// SCPI: [SOURce<HW>]:BB:EVDO:ANETwork:RAB:LENGth
EvdoRabLenEnum value = driver.Source.Bb.Evdo.Anetwork.Rab.Length;
driver.Source.Bb.Evdo.Anetwork.Rab.Length = EvdoRabLenEnum.RL16;

Sets the duration (in slots) of a Reverse Activity bit. Note: This parameter is available for physical layer subtype 0&1 only.

length: RL8 | RL16 | RL32 | RL64


double Level#
// SCPI: [SOURce<HW>]:BB:EVDO:ANETwork:RAB:LEVel
double value = driver.Source.Bb.Evdo.Anetwork.Rab.Level;
driver.Source.Bb.Evdo.Anetwork.Rab.Level = 1.0;

Sets the power within the MAC block for the Reverse Activity channel.

level: float


int Offset#
// SCPI: [SOURce<HW>]:BB:EVDO:ANETwork:RAB:OFFSet
int value = driver.Source.Bb.Evdo.Anetwork.Rab.Offset;
driver.Source.Bb.Evdo.Anetwork.Rab.Offset = 1;

Sets the starting time offset of the Reverse Activity bit in slots. The command is specified in Reverse Activity Length/8 units. The RA bit starts when the following equation is satisfied: System Time mod RAB length = RAB Offset, where System Time is expressed in slots. Note: This parameter is available for physical layer subtype 0&1 only.

offset: integer


bool State#
// SCPI: [SOURce<HW>]:BB:EVDO:ANETwork:RAB:STATe
bool value = driver.Source.Bb.Evdo.Anetwork.Rab.State;
driver.Source.Bb.Evdo.Anetwork.Rab.State = false;

Activates or deactivates the reverse activity bit (RAB) .

state: 1 | ON | 0| OFF


Subgroups