Source:Bb:Eutra:Uplink:Rtfb#
SCPI Commands
- [SOURce<HW>]:BB:EUTRa:UL:RTFB:AACK
- [SOURce<HW>]:BB:EUTRa:UL:RTFB:ACKDefinition
- [SOURce<HW>]:BB:EUTRa:UL:RTFB:ADUDelay
- [SOURce<HW>]:BB:EUTRa:UL:RTFB:BBSelector
- [SOURce<HW>]:BB:EUTRa:UL:RTFB:BEINsertion
- [SOURce<HW>]:BB:EUTRa:UL:RTFB:BERate
- [SOURce<HW>]:BB:EUTRa:UL:RTFB:CONNector
- [SOURce<HW>]:BB:EUTRa:UL:RTFB:DMODe
- [SOURce<HW>]:BB:EUTRa:UL:RTFB:GENReports
- [SOURce<HW>]:BB:EUTRa:UL:RTFB:ITADvance
- [SOURce<HW>]:BB:EUTRa:UL:RTFB:ITAFeedback
- [SOURce<HW>]:BB:EUTRa:UL:RTFB:LOFFset
- [SOURce<HW>]:BB:EUTRa:UL:RTFB:MAXTrans
- [SOURce<HW>]:BB:EUTRa:UL:RTFB:MODE
- [SOURce<HW>]:BB:EUTRa:UL:RTFB:RVSequence
- [SOURce<HW>]:BB:EUTRa:UL:RTFB:SERate
Direct SCPI Members
- bool Aack#
// SCPI: [SOURce<HW>]:BB:EUTRa:UL:RTFB:AACK bool value = driver.Source.Bb.Eutra.Uplink.Rtfb.Aack; driver.Source.Bb.Eutra.Uplink.Rtfb.Aack = false;If enabled, the signal generator will not use any external HARQ feedback from the DUT for its HARQ processes until an ACK command is received the first time.
assumeAck: 1 | ON | 0| OFF
- LowHighEnum AckDefinition#
// SCPI: [SOURce<HW>]:BB:EUTRa:UL:RTFB:ACKDefinition LowHighEnum value = driver.Source.Bb.Eutra.Uplink.Rtfb.AckDefinition; driver.Source.Bb.Eutra.Uplink.Rtfb.AckDefinition = LowHighEnum.HIGH;(Binary ACK/NACK mode only) Determines whether a high or a low binary level on the feedback line connector represents an ACK.
ackDefinition: HIGH | LOW
- double AduDelay#
// SCPI: [SOURce<HW>]:BB:EUTRa:UL:RTFB:ADUDelay double value = driver.Source.Bb.Eutra.Uplink.Rtfb.AduDelay; driver.Source.Bb.Eutra.Uplink.Rtfb.AduDelay = 1.0;Determines the point in time when the feedback can be sent to the instrument. Mode / Value Range
Binary / 3GPP Distance Mode: -1 to 2.99 subframes
Direct Response Distance Mode: +1 to 6.99 subframes
Serial and Serial 3x8 / UE x > Config > 3GPP Release = Release 8/9 or LTE-Advanced: -1 to 1.99 subframes UE x > Config > 3GPP Release = eMTC/NB-IoT: -18 to -0.3 subframes
addUserDelay: float
- int BbSelector#
// SCPI: [SOURce<HW>]:BB:EUTRa:UL:RTFB:BBSelector int value = driver.Source.Bb.Eutra.Uplink.Rtfb.BbSelector; driver.Source.Bb.Eutra.Uplink.Rtfb.BbSelector = 1;In serial mode, required for multiplexing serial commands for different basebands to one feedback line.
basebandSelect: integer
- FeedbackBlerModeEnum BeInsertion#
// SCPI: [SOURce<HW>]:BB:EUTRa:UL:RTFB:BEINsertion FeedbackBlerModeEnum value = driver.Source.Bb.Eutra.Uplink.Rtfb.BeInsertion; driver.Source.Bb.Eutra.Uplink.Rtfb.BeInsertion = FeedbackBlerModeEnum.APRocesses;Enables/disables the statistical insertion of block errors into PUSCH packets. The block error insertion can be enabled for a single HARQ process or for all processes. In the single HARQ process case, the used process is always the one that corresponds to the first activated PUSCH.
blockErrInsert: OFF | FPRocess | APRocesses
- double BitErrorRate#
// SCPI: [SOURce<HW>]:BB:EUTRa:UL:RTFB:BERate double value = driver.Source.Bb.Eutra.Uplink.Rtfb.BitErrorRate; driver.Source.Bb.Eutra.Uplink.Rtfb.BitErrorRate = 1.0;Block error rate for the statistical insertion of block errors.
blockErrRate: float
- FeedbackConnectorEnum Connector#
// SCPI: [SOURce<HW>]:BB:EUTRa:UL:RTFB:CONNector FeedbackConnectorEnum value = driver.Source.Bb.Eutra.Uplink.Rtfb.Connector; driver.Source.Bb.Eutra.Uplink.Rtfb.Connector = FeedbackConnectorEnum.GLOBal;Determines the feedback line connector.
connector: LOCal | GLOBal
LOCal: T/M3 connector for R&S SMW-B10, T/M 2 connector for R&S SMW-B9
GLOBal: For future use.
- FeedbackDistModeEnum Dmode#
// SCPI: [SOURce<HW>]:BB:EUTRa:UL:RTFB:DMODe FeedbackDistModeEnum value = driver.Source.Bb.Eutra.Uplink.Rtfb.Dmode; driver.Source.Bb.Eutra.Uplink.Rtfb.Dmode = FeedbackDistModeEnum.DIRect;Determines how the number of the uplink subframe is calculated, in which the signaled feedback has the desired effect.
distanceMode: STD | DIRect
- bool GenReports#
// SCPI: [SOURce<HW>]:BB:EUTRa:UL:RTFB:GENReports bool value = driver.Source.Bb.Eutra.Uplink.Rtfb.GenReports; driver.Source.Bb.Eutra.Uplink.Rtfb.GenReports = false;Triggers the instrument to create and store transmission and/or reception realtime feedback debug reports.
genDebugReports: 1 | ON | 0| OFF
- int ItAdvance#
// SCPI: [SOURce<HW>]:BB:EUTRa:UL:RTFB:ITADvance int value = driver.Source.Bb.Eutra.Uplink.Rtfb.ItAdvance; driver.Source.Bb.Eutra.Uplink.Rtfb.ItAdvance = 1;The initial timing advance of the uplink signal (at the output of the instrument’s baseband unit) in units of 16 TS.
initTimAdvance: integer
- bool ItaFeedback#
// SCPI: [SOURce<HW>]:BB:EUTRa:UL:RTFB:ITAFeedback bool value = driver.Source.Bb.Eutra.Uplink.Rtfb.ItaFeedback; driver.Source.Bb.Eutra.Uplink.Rtfb.ItaFeedback = false;If enabled the instrument ignores timing adjustment feedback. For missing feedback, no error message is indicated. If disabled, the instrument indicates error for missing TA adjustment command from the base station.
ignoreTimingAdj: 1 | ON | 0| OFF
- int Loffset#
// SCPI: [SOURce<HW>]:BB:EUTRa:UL:RTFB:LOFFset int value = driver.Source.Bb.Eutra.Uplink.Rtfb.Loffset; driver.Source.Bb.Eutra.Uplink.Rtfb.Loffset = 1;Delays the start time for generation of the debug report files.
loggingOffset: integer
- int MaxTrans#
// SCPI: [SOURce<HW>]:BB:EUTRa:UL:RTFB:MAXTrans int value = driver.Source.Bb.Eutra.Uplink.Rtfb.MaxTrans; driver.Source.Bb.Eutra.Uplink.Rtfb.MaxTrans = 1;After this maximum number of transmissions (incl. first transmission) , the first redundancy version of the redundancy version sequence is used even in case of NACK.
maxTransmission: integer
- FeedbackModeEnum Mode#
// SCPI: [SOURce<HW>]:BB:EUTRa:UL:RTFB:MODE FeedbackModeEnum value = driver.Source.Bb.Eutra.Uplink.Rtfb.Mode; driver.Source.Bb.Eutra.Uplink.Rtfb.Mode = FeedbackModeEnum.BAN;Enables realtime feedback and determines the mode (binary or serial) .
mode: OFF | SERial | S3X8 | BAN
- string RvSequence#
// SCPI: [SOURce<HW>]:BB:EUTRa:UL:RTFB:RVSequence string value = driver.Source.Bb.Eutra.Uplink.Rtfb.RvSequence; driver.Source.Bb.Eutra.Uplink.Rtfb.RvSequence = "abc";Determines the sequence of redundancy versions for the individual HARQ processes. Unless otherwise requested by serial feedback commands, the first value in the sequence of redundancy versions is used each time an ACK is received or for the very first transmission of a process. The sequence of redundancy versions is read out cyclically, i.e. whenever a NACK is received and a retransmission is requested, the next redundancy version in the sequence is used. The first value in the sequence is used again even in case a NACK is received, if the maximum number of transmissions (BB:EUTR:UL:RTFB:MAXT) in a process was reached.
redVersSequence: string
- EutraSerialRateEnum SerRte#
// SCPI: [SOURce<HW>]:BB:EUTRa:UL:RTFB:SERate EutraSerialRateEnum value = driver.Source.Bb.Eutra.Uplink.Rtfb.SerRte; driver.Source.Bb.Eutra.Uplink.Rtfb.SerRte = EutraSerialRateEnum.SR1_6M;(Serial mode only) Determines the bit rate of the serial transmission.
serialRate: SR115_2K | SR1_92M | SR1_6M