RsSmw
RsSmw
  • RsSmw C# API Structure
  • Source
  • Source:Bb
  • Source:Bb:Eutra
  • Source:Bb:Eutra:Uplink
  • Source:Bb:Eutra:Uplink:Pusch

Source:Bb:Eutra:Uplink:Pusch#

SCPI Commands

[SOURce<HW>]:BB:EUTRa:UL:PUSCh:FHMode
[SOURce<HW>]:BB:EUTRa:UL:PUSCh:FHOFfset
[SOURce<HW>]:BB:EUTRa:UL:PUSCh:NHOFfset
[SOURce<HW>]:BB:EUTRa:UL:PUSCh:NHOPping
[SOURce<HW>]:BB:EUTRa:UL:PUSCh:NOSM

Direct SCPI Members

UlFreqHopModeEnum FhMode#
// SCPI: [SOURce<HW>]:BB:EUTRa:UL:PUSCh:FHMode
UlFreqHopModeEnum value = driver.Source.Bb.Eutra.Uplink.Pusch.FhMode;
driver.Source.Bb.Eutra.Uplink.Pusch.FhMode = UlFreqHopModeEnum.INTer;

Sets the frequency hopping mode for PUSCH.

freqHoppingMode: INTRa | INTer


int FhOffset#
// SCPI: [SOURce<HW>]:BB:EUTRa:UL:PUSCh:FHOFfset
int value = driver.Source.Bb.Eutra.Uplink.Pusch.FhOffset;
driver.Source.Bb.Eutra.Uplink.Pusch.FhOffset = 1;

Sets the PUSCH Hopping Offset NRBHO. The PUSCH Hopping Offset determines the first physical resource block and the maximum number of physical resource blocks available for PUSCH transmission if PUSCH frequency hopping is used.

fhoppOffset: integer


int Nhoffset#
// SCPI: [SOURce<HW>]:BB:EUTRa:UL:PUSCh:NHOFfset
int value = driver.Source.Bb.Eutra.Uplink.Pusch.Nhoffset;
driver.Source.Bb.Eutra.Uplink.Pusch.Nhoffset = 1;

Sets the narrowband hopping offset.

nbHoppingOffset: integer


bool Nhopping#
// SCPI: [SOURce<HW>]:BB:EUTRa:UL:PUSCh:NHOPping
bool value = driver.Source.Bb.Eutra.Uplink.Pusch.Nhopping;
driver.Source.Bb.Eutra.Uplink.Pusch.Nhopping = false;

Enables narrowband hopping.

nbHopping: 1 | ON | 0| OFF


int Nosm#
// SCPI: [SOURce<HW>]:BB:EUTRa:UL:PUSCh:NOSM
int value = driver.Source.Bb.Eutra.Uplink.Pusch.Nosm;
driver.Source.Bb.Eutra.Uplink.Pusch.Nosm = 1;

Sets the number of sub-bands (Nsb) into that the total range of physical resource blocks available for PUSCH transmission is divided. The frequency hopping is performed at sub-band level.

subBandCount: integer

PreviousNext

© Copyright © Rohde & Schwarz 2026.