Source:Bb:Eutra:Tcw:Ws#

SCPI Commands

[SOURce<HW>]:BB:EUTRa:TCW:WS:ACPucch
[SOURce<HW>]:BB:EUTRa:TCW:WS:ANBits
[SOURce<HW>]:BB:EUTRa:TCW:WS:ANPattern
[SOURce<HW>]:BB:EUTRa:TCW:WS:BFORmat
[SOURce<HW>]:BB:EUTRa:TCW:WS:CEMode
[SOURce<HW>]:BB:EUTRa:TCW:WS:CHBW
[SOURce<HW>]:BB:EUTRa:TCW:WS:CLID
[SOURce<HW>]:BB:EUTRa:TCW:WS:CYCPrefix
[SOURce<HW>]:BB:EUTRa:TCW:WS:DUPLex
[SOURce<HW>]:BB:EUTRa:TCW:WS:FMTHroughput
[SOURce<HW>]:BB:EUTRa:TCW:WS:FRC
[SOURce<HW>]:BB:EUTRa:TCW:WS:FROFfset
[SOURce<HW>]:BB:EUTRa:TCW:WS:HSMode
[SOURce<HW>]:BB:EUTRa:TCW:WS:NTAOffset
[SOURce<HW>]:BB:EUTRa:TCW:WS:OUPLevel
[SOURce<HW>]:BB:EUTRa:TCW:WS:OVRB
[SOURce<HW>]:BB:EUTRa:TCW:WS:PFMT
[SOURce<HW>]:BB:EUTRa:TCW:WS:PLEVel
[SOURce<HW>]:BB:EUTRa:TCW:WS:PLPC
[SOURce<HW>]:BB:EUTRa:TCW:WS:PLPS
[SOURce<HW>]:BB:EUTRa:TCW:WS:PROCondition
[SOURce<HW>]:BB:EUTRa:TCW:WS:REPetitions
[SOURce<HW>]:BB:EUTRa:TCW:WS:RFFRequency
[SOURce<HW>]:BB:EUTRa:TCW:WS:SCSPacing
[SOURce<HW>]:BB:EUTRa:TCW:WS:SPSFrame
[SOURce<HW>]:BB:EUTRa:TCW:WS:TDDConfig
[SOURce<HW>]:BB:EUTRa:TCW:WS:TIOBase
[SOURce<HW>]:BB:EUTRa:TCW:WS:UEID
[SOURce<HW>]:BB:EUTRa:TCW:WS:VDRFrequency

Cloning the Group

// Create a clone of the original group, that exists independently
var ws2 = driver.Source.Bb.Eutra.Tcw.Ws.Clone();

Direct SCPI Members

bool AcPucch#
// SCPI: [SOURce<HW>]:BB:EUTRa:TCW:WS:ACPucch
bool value = driver.Source.Bb.Eutra.Tcw.Ws.AcPucch;
driver.Source.Bb.Eutra.Tcw.Ws.AcPucch = false;

Enables the optional transmission of PUCCH format 2.

addConfigPucch: 1 | ON | 0| OFF


UtraTcwaCkNackBitsEnum AnBits#
// SCPI: [SOURce<HW>]:BB:EUTRa:TCW:WS:ANBits
UtraTcwaCkNackBitsEnum value = driver.Source.Bb.Eutra.Tcw.Ws.AnBits;
driver.Source.Bb.Eutra.Tcw.Ws.AnBits = UtraTcwaCkNackBitsEnum.ANB16;

In performance requirement test cases, sets the number of encoded ACK/NACK bits per subframe.

ackNackBits: ANB4 | ANB16 | ANB24 | ANB64


class AnPattern_Data

Structure for reading output parameters.

string AckNackPattern

numeric

int Bitcount

integer

AnPattern_Data AnPattern#
// SCPI: [SOURce<HW>]:BB:EUTRa:TCW:WS:ANPattern
AnPattern_Data value = driver.Source.Bb.Eutra.Tcw.Ws.AnPattern;

In performance requirement test cases, queries the ACK/NACK + SR pattern bits.

For return value, see the help for AnPattern_Data structure arguments


EutraTcwBurstFormatEnum Bformat#
// SCPI: [SOURce<HW>]:BB:EUTRa:TCW:WS:BFORmat
EutraTcwBurstFormatEnum value = driver.Source.Bb.Eutra.Tcw.Ws.Bformat;
driver.Source.Bb.Eutra.Tcw.Ws.Bformat = EutraTcwBurstFormatEnum.BF0;

Sets the burst format.

burstFormat: BF4 | BF3 | BF2 | BF1 | BF0


MappingTypeEnum CeMode#
// SCPI: [SOURce<HW>]:BB:EUTRa:TCW:WS:CEMode
MappingTypeEnum value = driver.Source.Bb.Eutra.Tcw.Ws.CeMode;
driver.Source.Bb.Eutra.Tcw.Ws.CeMode = MappingTypeEnum.A;

Selects the CEMode for test case 8.2.7 according to table 8.2.7.4.2-2: Test parameters for testing PUSCH of TS 36.141.

ceMode: A | B


EutraTcwcHanBwEnum Chbw#
// SCPI: [SOURce<HW>]:BB:EUTRa:TCW:WS:CHBW
EutraTcwcHanBwEnum value = driver.Source.Bb.Eutra.Tcw.Ws.Chbw;
driver.Source.Bb.Eutra.Tcw.Ws.Chbw = EutraTcwcHanBwEnum.BW00_20;

Selects the channel bandwidth in MHz: 20, 10, 5, 3, 1.4, 15, or 0.2 MHz.

chanBandwidth: BW20_00 | BW10_00 | BW5_00 | BW3_00 | BW1_40 | BW15_00 | BW00_20


int Clid#
// SCPI: [SOURce<HW>]:BB:EUTRa:TCW:WS:CLID
int value = driver.Source.Bb.Eutra.Tcw.Ws.Clid;
driver.Source.Bb.Eutra.Tcw.Ws.Clid = 1;

Sets the Cell ID.

cellId: integer


EuTraDurationEnum CycPrefix#
// SCPI: [SOURce<HW>]:BB:EUTRa:TCW:WS:CYCPrefix
EuTraDurationEnum value = driver.Source.Bb.Eutra.Tcw.Ws.CycPrefix;
driver.Source.Bb.Eutra.Tcw.Ws.CycPrefix = EuTraDurationEnum.EXTended;

Selects normal or extended cyclic prefix.

cyclicPrefix: EXTended | NORMal


EutraDuplexModeEnum Duplex#
// SCPI: [SOURce<HW>]:BB:EUTRa:TCW:WS:DUPLex
EutraDuplexModeEnum value = driver.Source.Bb.Eutra.Tcw.Ws.Duplex;
driver.Source.Bb.Eutra.Tcw.Ws.Duplex = EutraDuplexModeEnum.FDD;

Selects whether TDD or FDD duplexing mode is used.

duplex: TDD | FDD


EutraTcwfRactMaxThroughputEnum FmThroughput#
// SCPI: [SOURce<HW>]:BB:EUTRa:TCW:WS:FMTHroughput
EutraTcwfRactMaxThroughputEnum value = driver.Source.Bb.Eutra.Tcw.Ws.FmThroughput;
driver.Source.Bb.Eutra.Tcw.Ws.FmThroughput = EutraTcwfRactMaxThroughputEnum.FMT30;

Selects the fraction of maximum throughput.

fractMaxThrough: FMT70 | FMT30


EutraUlFrcEnum Frc#
// SCPI: [SOURce<HW>]:BB:EUTRa:TCW:WS:FRC
EutraUlFrcEnum value = driver.Source.Bb.Eutra.Tcw.Ws.Frc;
driver.Source.Bb.Eutra.Tcw.Ws.Frc = EutraUlFrcEnum.A11;

Queries the fixed reference channel used.

frc: A11 | A12 | A13 | A14 | A15 | A21 | A22 | A23 | A31 | A32 | A33 | A34 | A35 | A36 | A37 | A41 | A42 | A43 | A44 | A45 | A46 | A47 | A48 | A51 | A52 | A53 | A54 | A55 | A56 | A57 | A71 | A72 | A73 | A74 | A75 | A76 | A81 | A82 | A83 | A84 | A85 | A86 | UE11 | UE12 | UE21 | UE22 | UE3 | A16 | A17 | A121 | A122 | A123 | A124 | A125 | A126 | A131 | A132 | A133 | A134 | A135 | A136 | A171 | A172 | A173 | A174 | A175 | A176 | A181 | A182 | A183 | A184 | A185 | A186 | A191 | A192 | A193 | A194 | A195 | A196 | A211 | A212 | A213 | A214 | A215 | A216 | A221 | A222 | A223 | A224


EutraTcwfReqOffsetEnum FrOffset#
// SCPI: [SOURce<HW>]:BB:EUTRa:TCW:WS:FROFfset
EutraTcwfReqOffsetEnum value = driver.Source.Bb.Eutra.Tcw.Ws.FrOffset;
driver.Source.Bb.Eutra.Tcw.Ws.FrOffset = EutraTcwfReqOffsetEnum.FO_0;

Sets the frequency offset.

freqOffset: FO_1340 | FO_625 | FO_270 | FO_0 | FO_200


bool HsMode#
// SCPI: [SOURce<HW>]:BB:EUTRa:TCW:WS:HSMode
bool value = driver.Source.Bb.Eutra.Tcw.Ws.HsMode;
driver.Source.Bb.Eutra.Tcw.Ws.HsMode = false;

Enables/disables high-speed mode.

highSpeedMode: 1 | ON | 0| OFF


EutraTcwsIgAdvNtaOffsEnum NtaOffset#
// SCPI: [SOURce<HW>]:BB:EUTRa:TCW:WS:NTAOffset
EutraTcwsIgAdvNtaOffsEnum value = driver.Source.Bb.Eutra.Tcw.Ws.NtaOffset;
driver.Source.Bb.Eutra.Tcw.Ws.NtaOffset = EutraTcwsIgAdvNtaOffsEnum.NTA0;

Sets the parameter NTAoffset.

sigAdvNtaOffset: NTA624 | NTA0


double OupLevel#
// SCPI: [SOURce<HW>]:BB:EUTRa:TCW:WS:OUPLevel
double value = driver.Source.Bb.Eutra.Tcw.Ws.OupLevel;
driver.Source.Bb.Eutra.Tcw.Ws.OupLevel = 1.0;

The settings of the selected test case become active only after selecting Apply Settings.

outPowerLevel: float


int Ovrb#
// SCPI: [SOURce<HW>]:BB:EUTRa:TCW:WS:OVRB
int value = driver.Source.Bb.Eutra.Tcw.Ws.Ovrb;
driver.Source.Bb.Eutra.Tcw.Ws.Ovrb = 1;

Sets the number of RB the allocated RB(s) are shifted with.

offsetVrb: integer


EutraPracNbiotPreambleFormatEnum Pfmt#
// SCPI: [SOURce<HW>]:BB:EUTRa:TCW:WS:PFMT
EutraPracNbiotPreambleFormatEnum value = driver.Source.Bb.Eutra.Tcw.Ws.Pfmt;
driver.Source.Bb.Eutra.Tcw.Ws.Pfmt = EutraPracNbiotPreambleFormatEnum._0;

Selects the NPRACH preamble format for test case 8.5.3 according to tables 8.5.3.5-1 (FDD) or 8.5.3.5-2 (TDD) of TS 36.141.

preambleFormat: F0 | F1 | F2 | F0A | F1A | 0| 1


string Plevel#
// SCPI: [SOURce<HW>]:BB:EUTRa:TCW:WS:PLEVel
string value = driver.Source.Bb.Eutra.Tcw.Ws.Plevel;

Queries the Power Level.

powerLevel: string


string Plpc#
// SCPI: [SOURce<HW>]:BB:EUTRa:TCW:WS:PLPC
string value = driver.Source.Bb.Eutra.Tcw.Ws.Plpc;

Queries the resulting PUCCH power level by activated optional transmission of PUCCH format 2.

powerLevelPucch: string


string Plps#
// SCPI: [SOURce<HW>]:BB:EUTRa:TCW:WS:PLPS
string value = driver.Source.Bb.Eutra.Tcw.Ws.Plps;

Queries the resulting PUSCH power level.

powerLevelPusch: string


EutraTcwPropagCondEnum ProCondition#
// SCPI: [SOURce<HW>]:BB:EUTRa:TCW:WS:PROCondition
EutraTcwPropagCondEnum value = driver.Source.Bb.Eutra.Tcw.Ws.ProCondition;
driver.Source.Bb.Eutra.Tcw.Ws.ProCondition = EutraTcwPropagCondEnum.AWGNonly;

Selects a predefined multipath fading propagation conditions. The settings of the fading simulator are adjusted according to the corresponding channel model as defined in 3GPP TS 36.141, Annex B.

propagationCond: AWGNonly | HST3 | HST1 | PDMov | ETU200Mov | ETU300 | EVA70 | EVA5 | EPA5 | ETU70 | ETU5 | ETU200 | ETU1 | EPA1


EutraIotRepetitionsTcwEnum Repetitions#
// SCPI: [SOURce<HW>]:BB:EUTRa:TCW:WS:REPetitions
EutraIotRepetitionsTcwEnum value = driver.Source.Bb.Eutra.Tcw.Ws.Repetitions;
driver.Source.Bb.Eutra.Tcw.Ws.Repetitions = EutraIotRepetitionsTcwEnum.R1;

Sets the Tx repetitions of wanted signal.

repetitions: R4 | R8 | R32 | R16 | R64 | R2 | R1


int RfFrequency#
// SCPI: [SOURce<HW>]:BB:EUTRa:TCW:WS:RFFRequency
int value = driver.Source.Bb.Eutra.Tcw.Ws.RfFrequency;
driver.Source.Bb.Eutra.Tcw.Ws.RfFrequency = 1;

Sets the RF frequency of the wanted signal.

rfFrequency: integer


EutraSubCarrierSpacingEnum ScSpacing#
// SCPI: [SOURce<HW>]:BB:EUTRa:TCW:WS:SCSPacing
EutraSubCarrierSpacingEnum value = driver.Source.Bb.Eutra.Tcw.Ws.ScSpacing;
driver.Source.Bb.Eutra.Tcw.Ws.ScSpacing = EutraSubCarrierSpacingEnum.S15;

Sets the NB-IoT subcarrier spacing of 15 kHz or 3.75 kHz.

subcarrierSpac: S15 | S375


int SpsFrame#
// SCPI: [SOURce<HW>]:BB:EUTRa:TCW:WS:SPSFrame
int value = driver.Source.Bb.Eutra.Tcw.Ws.SpsFrame;
driver.Source.Bb.Eutra.Tcw.Ws.SpsFrame = 1;

In TDD duplexing mode, sets the Special Subframe Configuration number.

specSubframe: integer


int TddConfig#
// SCPI: [SOURce<HW>]:BB:EUTRa:TCW:WS:TDDConfig
int value = driver.Source.Bb.Eutra.Tcw.Ws.TddConfig;
driver.Source.Bb.Eutra.Tcw.Ws.TddConfig = 1;

For TDD mode, selects the UL/DL Configuration number.

tddConfig: integer


double TioBase#
// SCPI: [SOURce<HW>]:BB:EUTRa:TCW:WS:TIOBase
double value = driver.Source.Bb.Eutra.Tcw.Ws.TioBase;

Queries the timing offset base value.

timingOffsetBase: float


int UeId#
// SCPI: [SOURce<HW>]:BB:EUTRa:TCW:WS:UEID
int value = driver.Source.Bb.Eutra.Tcw.Ws.UeId;
driver.Source.Bb.Eutra.Tcw.Ws.UeId = 1;

Sets the UE ID/n_RNTI.

ueIdnRnti: integer


int VdrFrequency#
// SCPI: [SOURce<HW>]:BB:EUTRa:TCW:WS:VDRFrequency
int value = driver.Source.Bb.Eutra.Tcw.Ws.VdrFrequency;
driver.Source.Bb.Eutra.Tcw.Ws.VdrFrequency = 1;

Sets the virtual downlink frequency, used to calculate the UL Doppler shift.

virtDlRf: integer


Subgroups