RsSmw
RsSmw
  • RsSmw C# API Structure
  • Source
  • Source:Bb
  • Source:Bb:Eutra
  • Source:Bb:Eutra:Downlink
  • Source:Bb:Eutra:Downlink:Mimo
  • Source:Bb:Eutra:Downlink:Mimo:Apm
  • Source:Bb:Eutra:Downlink:Mimo:Apm:Cs
  • Source:Bb:Eutra:Downlink:Mimo:Apm:Cs:Ap<AntennaPortNullRepCap>
  • Source:Bb:Eutra:Downlink:Mimo:Apm:Cs:Ap:Row<RowRepCap>
  • Source:Bb:Eutra:Downlink:Mimo:Apm:Cs:Ap:Row:Real

Source:Bb:Eutra:Downlink:Mimo:Apm:Cs:Ap:Row:Real#

SCPI Commands

[SOURce<HW>]:BB:EUTRa:DL:MIMO:APM:CS:AP<DIR0>:ROW<ST0>:REAL

Direct SCPI Members

double Get ( )#
double Get ( AntennaPortNullRepCap antennaPortNull, RowRepCap row )
void Set ( double antPortMapDat )#
void Set ( double antPortMapDat, AntennaPortNullRepCap antennaPortNull, RowRepCap row )
// SCPI: [SOURce<HW>]:BB:EUTRa:DL:MIMO:APM:CS:AP<DIR0>:ROW<ST0>:REAL
// Get:
double value = driver.Source.Bb.Eutra.Downlink.Mimo.Apm.Cs.Ap.Row.Real.Get();
double value = driver.Source.Bb.Eutra.Downlink.Mimo.Apm.Cs.Ap.Row.Real.Get(AntennaPortNullRepCap.Default, RowRepCap.Default);
// Set:
driver.Source.Bb.Eutra.Downlink.Mimo.Apm.Cs.Ap.Row.Real.Set(1.0, AntennaPortNullRepCap.Default, RowRepCap.Default);
driver.Source.Bb.Eutra.Downlink.Mimo.Apm.Cs.Ap.Row.Real.Set(1.0);

Define the mapping of the antenna ports to the physical antennas.

antPortMapDat The mapping of the first four APs AP0 | 1|2 | 3 depends on the system configuration as follows: With SEParate exactly one single AP can be mapped to a BB. With COUPled | CPENtity none or exactly one single AP can be mapped to a BB. To map an AP, use the command SOURce1:BB:EUTRa:DL:MIMO:APM:CS:AP0 | 1|2 | 3:ROW0 | 1|2 | 3:REAL 1. The corresponding …:CS:AP0 | 1|2 | 3:ROW0 | 1|2 | 3:IMAG command has no effect. The REAL (Magnitude) and IMAGinary (Phase) values are interdependent. Their value ranges change depending on each other and so that the resulting complex value is as follows: REAL+jIMAGinary ≤ 1 Otherwise, the values are normalized to Magnitude = 1.

antennaPortNull Repeated capability selector

row Repeated capability selector

When you do not use any explicit repeated capability selector, the value is taken from its parent group.

PreviousNext

© Copyright © Rohde & Schwarz 2026.