Source:Bb:Esequencer:Rtci:Sequencer:Stream:StReset#

SCPI Commands

[SOURce<HW>]:BB:ESEQuencer:RTCI:[SEQuencer<ST>]:STReam:STReset

Direct SCPI Members

void Set ( SequencerRepCap sequencer )#
void SetAndWait ( SequencerRepCap sequencer )#
void SetAndWait ( SequencerRepCap sequencer, int opcTimeoutMs )
// SCPI: [SOURce<HW>]:BB:ESEQuencer:RTCI:[SEQuencer<ST>]:STReam:STReset
driver.Source.Bb.Esequencer.Rtci.Sequencer.Stream.StReset.Set(SequencerRepCap.Default);
driver.Source.Bb.Esequencer.Rtci.Sequencer.Stream.StReset.SetAndWait(SequencerRepCap.Default);
driver.Source.Bb.Esequencer.Rtci.Sequencer.Stream.StReset.SetAndWait(SequencerRepCap.Default, 1000);

Reset system time in streaming interface, buffer is also empty in the coder board. Note: Do not use this command if streams are added in the I/Q Stream Mapper, for example if stream A and stream B are both routed to RF A.

sequencer Repeated capability selector

SetAndWait is the same as Set, but waits for the operation to complete. The optional entered opcTimeoutMs is only valid for this call. If you omit the opcTimeoutMs, the method uses the settable value RsSmw.Utilities.OpcTimeout.