Source:Bb:Btooth:Cs:Sevent:UpPattern#
SCPI Commands
- [SOURce<HW>]:BB:BTOoth:CS:[SEVent<CH0>]:UPPattern
Direct SCPI Members
- BtoCsPyLdPattEnum Get ( )#
- BtoCsPyLdPattEnum Get ( ChannelNullRepCap channelNull )
// SCPI: [SOURce<HW>]:BB:BTOoth:CS:[SEVent<CH0>]:UPPattern BtoCsPyLdPattEnum value = driver.Source.Bb.Btooth.Cs.Sevent.UpPattern.Get(); BtoCsPyLdPattEnum value = driver.Source.Bb.Btooth.Cs.Sevent.UpPattern.Get(ChannelNullRepCap.Default);Selects the user payload pattern for a random CS sequence. This pattern is the payload type for CS step configuration modes Mode-1 or Mode-3.
pattern: PRBS09 | RE1S | RE2S | PRBS15 | RE3S | RE4S | RE5S | RE6S | UPLD
PRBS09 | PRBS15: Pseudo random bit sequence with 9-bit length or 15-bit length in accordance with the IUT-T.
RE1S | RE2S | RE3S | RE4S | RE5S | RE6S: Repeated 8-digit sequences of zeroes and ones.
UPLD: Uses the CS_SYNC_User_Payload. Set this payload via a data list file and the following command::SOURce1:BB:BTOoth:CS:SEVentch0:UPAYloadSee also [:SOURcehw]:BB:BTOoth:CS[:SEVentch0]:UPAYload.
channelNullRepeated capability selectorWhen you do not use any explicit repeated capability selector, the value is taken from its parent group.