State

SCPI Command :

[SOURce<HW>]:BB:C2K:BSTation<ST>:CGRoup<DI0>:COFFset<CH>:QWCode:STATe
class StateCls[source]

State commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(baseStation=BaseStation.Default, groupNull=GroupNull.Default, offset=Offset.Default) bool[source]
# SCPI: [SOURce<HW>]:BB:C2K:BSTation<ST>:CGRoup<DI0>:COFFset<CH>:QWCode:STATe
value: bool = driver.source.bb.c2K.bstation.cgroup.coffset.qwCode.state.get(baseStation = repcap.BaseStation.Default, groupNull = repcap.GroupNull.Default, offset = repcap.Offset.Default)

Activates/deactivates the use of the quasi orthogonal Walsh codes for the channel. The quasi orthogonal Walsh Code set is selected for all channels of the base station with command [:SOURce<hw>]:BB:C2K:BSTation<st>:QWSet. For the traffic channels, this value is specific for the selected radio configuration. It is only available for radio configuration 3 and higher.

param baseStation

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bstation’)

param groupNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cgroup’)

param offset

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Coffset’)

return

state: 1| ON| 0| OFF

set(state: bool, baseStation=BaseStation.Default, groupNull=GroupNull.Default, offset=Offset.Default) None[source]
# SCPI: [SOURce<HW>]:BB:C2K:BSTation<ST>:CGRoup<DI0>:COFFset<CH>:QWCode:STATe
driver.source.bb.c2K.bstation.cgroup.coffset.qwCode.state.set(state = False, baseStation = repcap.BaseStation.Default, groupNull = repcap.GroupNull.Default, offset = repcap.Offset.Default)

Activates/deactivates the use of the quasi orthogonal Walsh codes for the channel. The quasi orthogonal Walsh Code set is selected for all channels of the base station with command [:SOURce<hw>]:BB:C2K:BSTation<st>:QWSet. For the traffic channels, this value is specific for the selected radio configuration. It is only available for radio configuration 3 and higher.

param state

1| ON| 0| OFF

param baseStation

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Bstation’)

param groupNull

optional repeated capability selector. Default value: Nr0 (settable in the interface ‘Cgroup’)

param offset

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Coffset’)