Offset

SCPI Command :

SENSe<CH>:[POWer]:OFFSet

class OffsetCls

Offset commands group definition. 2 total commands, 1 Subgroups, 1 group commands

get(channel=Channel.Default) → float

# SCPI: SENSe<CH>:[POWer]:OFFSet
value: float = driver.sense.power.offset.get(channel = repcap.Channel.Default)

Sets a level offset which is added to the measured level value after activation with command method RsSmbv.Sense.Power. Offset.State.set. The level offset allows, e.g. to consider an attenuator in the signal path.

param channel

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Sense’)

return

offset: float Range: -100.0 to 100.0, Unit: dB

set(offset: float, channel=Channel.Default) → None

# SCPI: SENSe<CH>:[POWer]:OFFSet
driver.sense.power.offset.set(offset = 1.0, channel = repcap.Channel.Default)

Sets a level offset which is added to the measured level value after activation with command method RsSmbv.Sense.Power. Offset.State.set. The level offset allows, e.g. to consider an attenuator in the signal path.

param offset

float Range: -100.0 to 100.0, Unit: dB

param channel

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Sense’)

Cloning the Group

# Create a clone of the original group, that exists independently
group2 = driver.sense.power.offset.clone()

Subgroups

• State