Source

SCPI Command :

SENSe<CH>:[POWer]:SOURce

class SourceCls

Source commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(channel=Channel.Default) → RsSmbv.enums.PowSensSource

# SCPI: SENSe<CH>:[POWer]:SOURce
value: enums.PowSensSource = driver.sense.power.source.get(channel = repcap.Channel.Default)

Determines the signal to be measured. Note: When measuring the RF signal, the sensor considers the corresponding correction factor at that frequency, and uses the level setting of the instrument as reference level.

param channel

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Sense’)

return

source: A| USER| RF

set(source: RsSmbv.enums.PowSensSource, channel=Channel.Default) → None

# SCPI: SENSe<CH>:[POWer]:SOURce
driver.sense.power.source.set(source = enums.PowSensSource.A, channel = repcap.Channel.Default)

Determines the signal to be measured. Note: When measuring the RF signal, the sensor considers the corresponding correction factor at that frequency, and uses the level setting of the instrument as reference level.

param source

A| USER| RF

param channel

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Sense’)