Psave

SCPI Commands :

DISPlay:PSAVe:HOLDoff
DISPlay:PSAVe:[STATe]

class PsaveCls

Psave commands group definition. 2 total commands, 0 Subgroups, 2 group commands

get_holdoff() → int

# SCPI: DISPlay:PSAVe:HOLDoff
value: int = driver.display.psave.get_holdoff()

Sets the wait time for the screen saver mode of the display.

return

holdoff_time_min: integer Range: 1 to 60, Unit: minute

get_state() → bool

# SCPI: DISPlay:PSAVe:[STATe]
value: bool = driver.display.psave.get_state()

Activates the screen saver mode of the display. We recommend that you use this mode to protect the display, if you operate the instrument in remote control. To define the wait time, use the command method RsSmbv.Display.Psave.holdoff.

return

state: 1| ON| 0| OFF

set_holdoff(holdoff_time_min: int) → None

# SCPI: DISPlay:PSAVe:HOLDoff
driver.display.psave.set_holdoff(holdoff_time_min = 1)

Sets the wait time for the screen saver mode of the display.

param holdoff_time_min

integer Range: 1 to 60, Unit: minute

set_state(state: bool) → None

# SCPI: DISPlay:PSAVe:[STATe]
driver.display.psave.set_state(state = False)

Activates the screen saver mode of the display. We recommend that you use this mode to protect the display, if you operate the instrument in remote control. To define the wait time, use the command method RsSmbv.Display.Psave.holdoff.

param state

1| ON| 0| OFF