SymbolRate

SCPI Command :

SYSTem:COMMunicate:RDEVice:OSCilloscope:SRATe

class SymbolRateCls[source]

SymbolRate commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get() → float[source]

# SCPI: SYSTem:COMMunicate:RDEVice:OSCilloscope:SRATe
value: float = driver.system.communicate.rdevice.oscilloscope.symbolRate.get()

Determines whether the 10 GHz mode (default) or 20 GHz mode of the connected oscilloscope is used. The 20 GHZ mode achieves a higher decimation gain, but reduces the record length by half.

return

rate: 10 GHz | 20 GHz No other sample rate values are allowed. Unit: HZ

set(rate: float) → None[source]

# SCPI: SYSTem:COMMunicate:RDEVice:OSCilloscope:SRATe
driver.system.communicate.rdevice.oscilloscope.symbolRate.set(rate = 1.0)

Determines whether the 10 GHz mode (default) or 20 GHz mode of the connected oscilloscope is used. The 20 GHZ mode achieves a higher decimation gain, but reduces the record length by half.

param rate

10 GHz | 20 GHz No other sample rate values are allowed. Unit: HZ