Right

SCPI Command :

CALCulate<n>:MARKer<m>:X:SLIMits:RIGHt

class RightCls

Right commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(window=Window.Default, marker=Marker.Default) → float

# SCPI: CALCulate<n>:MARKer<m>:X:SLIMits:RIGHt
value: float = driver.calculate.marker.x.slimits.right.get(window = repcap.Window.Default, marker = repcap.Marker.Default)

Defines the right limit of the marker search range for all markers in all windows. If you perform a measurement in the time domain, this command limits the range of the trace to be analyzed.

param window

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Calculate’)

param marker

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Marker’)

return

limit: The value range depends on the frequency range or sweep time. The unit is Hz for frequency domain measurements and s for time domain measurements. Unit: HZ

set(limit: float, window=Window.Default, marker=Marker.Default) → None

# SCPI: CALCulate<n>:MARKer<m>:X:SLIMits:RIGHt
driver.calculate.marker.x.slimits.right.set(limit = 1.0, window = repcap.Window.Default, marker = repcap.Marker.Default)

Defines the right limit of the marker search range for all markers in all windows. If you perform a measurement in the time domain, this command limits the range of the trace to be analyzed.

param limit

The value range depends on the frequency range or sweep time. The unit is Hz for frequency domain measurements and s for time domain measurements. Unit: HZ

param window

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Calculate’)

param marker

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Marker’)