Capture

SCPI Command :

CONFigure:WLAN:MIMO:CAPTure

Commands in total: 3

Subgroups: 2

Direct child commands: 1

get() → SignalPath

# CONFigure:WLAN:MIMO:CAPTure
value: enums.SignalPath = driver.applications.k91Wlan.configure.wlan.mimo.capture.get()

Specifies the signal path to be captured in MIMO sequential manual measurements. Subsequently, use the method RsFsw.applications.k10Xlte.initiate.immediate.perform() command to start capturing data.

Returns:

signal_path: RX1 | RX2 | RX3 | RX4 | RX5 | RX6 | RX7 | RX8 For details see ‘Manual Sequential MIMO Data Capture’.

set(signal_path: SignalPath) → None

# CONFigure:WLAN:MIMO:CAPTure
driver.applications.k91Wlan.configure.wlan.mimo.capture.set(signal_path = enums.SignalPath.RX1)

Specifies the signal path to be captured in MIMO sequential manual measurements. Subsequently, use the method RsFsw.applications.k10Xlte.initiate.immediate.perform() command to start capturing data.

Parameters:

signal_path – RX1 | RX2 | RX3 | RX4 | RX5 | RX6 | RX7 | RX8 For details see ‘Manual Sequential MIMO Data Capture’.

Cloning the Group

# Create a copy of the original group, that exists independently
capture_copy = driver.applications.k91Wlan.configure.wlan.mimo.capture.clone()

Subgroups

• Buffer
• TypePy