Buffer

SCPI Command :

CONFigure:WLAN:MIMO:CAPTure:BUFFer

class BufferCls[source]

Buffer commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get() → RsFsw.enums.SignalPath[source]

# SCPI: CONFigure:WLAN:MIMO:CAPTure:BUFFer
value: enums.SignalPath = driver.applications.k91Wlan.configure.wlan.mimo.capture.buffer.get()

Specifies the signal path to be captured in MIMO sequential manual measurements and immediately starts capturing data.

return

signal_path: RX1 | RX2 | RX3 | RX4 | RX5 | RX6 | RX7 | RX8 For details see ‘Manual Sequential MIMO Data Capture’.

set(signal_path: RsFsw.enums.SignalPath) → None[source]

# SCPI: CONFigure:WLAN:MIMO:CAPTure:BUFFer
driver.applications.k91Wlan.configure.wlan.mimo.capture.buffer.set(signal_path = enums.SignalPath.RX1)

Specifies the signal path to be captured in MIMO sequential manual measurements and immediately starts capturing data.

param signal_path

RX1 | RX2 | RX3 | RX4 | RX5 | RX6 | RX7 | RX8 For details see ‘Manual Sequential MIMO Data Capture’.