IfPower

SCPI Command :

TRIGger<tp>[:SEQuence]:LEVel:IFPower

class IfPowerCls

IfPower commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(triggerPort=TriggerPort.Default) → float

# SCPI: TRIGger<tp>[:SEQuence]:LEVel:IFPower
value: float = driver.applications.k70Vsa.trigger.sequence.level.ifPower.get(triggerPort = repcap.TriggerPort.Default)

Defines the power level at the third intermediate frequency that must be exceeded to cause a trigger event. Note that any RF attenuation or preamplification is considered when the trigger level is analyzed. If defined, a reference level offset is also considered.

param triggerPort

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Trigger’)

return

level_if_power: No help available

set(level_if_power: float, triggerPort=TriggerPort.Default) → None

# SCPI: TRIGger<tp>[:SEQuence]:LEVel:IFPower
driver.applications.k70Vsa.trigger.sequence.level.ifPower.set(level_if_power = 1.0, triggerPort = repcap.TriggerPort.Default)

Defines the power level at the third intermediate frequency that must be exceeded to cause a trigger event. Note that any RF attenuation or preamplification is considered when the trigger level is analyzed. If defined, a reference level offset is also considered.

param level_if_power

No help available

param triggerPort

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Trigger’)