Slope

SCPI Command :

TRIGger<tp>[:SEQuence]:SLOPe
class SlopeCls[source]

Slope commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get(triggerPort=TriggerPort.Default) RsFsw.enums.SlopeType[source]
# SCPI: TRIGger<tp>[:SEQuence]:SLOPe
value: enums.SlopeType = driver.applications.k70Vsa.trigger.sequence.slope.get(triggerPort = repcap.TriggerPort.Default)

For external and time domain trigger sources, you can define whether triggering occurs when the signal rises to the trigger level or falls down to it.

param triggerPort

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Trigger’)

return

type_py: POSitive | NEGative POSitive Triggers when the signal rises to the trigger level (rising edge) . NEGative Triggers when the signal drops to the trigger level (falling edge) .

set(type_py: RsFsw.enums.SlopeType, triggerPort=TriggerPort.Default) None[source]
# SCPI: TRIGger<tp>[:SEQuence]:SLOPe
driver.applications.k70Vsa.trigger.sequence.slope.set(type_py = enums.SlopeType.NEGative, triggerPort = repcap.TriggerPort.Default)

For external and time domain trigger sources, you can define whether triggering occurs when the signal rises to the trigger level or falls down to it.

param type_py

POSitive | NEGative POSitive Triggers when the signal rises to the trigger level (rising edge) . NEGative Triggers when the signal drops to the trigger level (falling edge) .

param triggerPort

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Trigger’)