Begin

SCPI Command :

CALCulate<n>:CHRDetection:POWer:OFFSet:BEGin

Commands in total: 1

Subgroups: 0

Direct child commands: 1

get(window=Window.Default) → float

# CALCulate<n>:CHRDetection:POWer:OFFSet:BEGin
value: float = driver.applications.k60Transient.calculate.chrDetection.power.offset.begin.get(window = repcap.Window.Default)

Defines the beginning of the measurement range for power results as an offset in seconds from the chirp start. This command is only available if the reference is EDGE (see method RsFsw.applications.k60Transient.calculate.chrDetection.power.reference.set() ) . For details on the measurement range parameters see ‘Measurement range’.

Parameters:

window – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Calculate’)

Returns:

time: Unit: S

set(time: float, window=Window.Default) → None

# CALCulate<n>:CHRDetection:POWer:OFFSet:BEGin
driver.applications.k60Transient.calculate.chrDetection.power.offset.begin.set(time = 1.0, window = repcap.Window.Default)

Defines the beginning of the measurement range for power results as an offset in seconds from the chirp start. This command is only available if the reference is EDGE (see method RsFsw.applications.k60Transient.calculate.chrDetection.power.reference.set() ) . For details on the measurement range parameters see ‘Measurement range’.

Parameters:

• time – Unit: S

• window – optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Calculate’)