Handover

SCPI Command :

[SENSe]:MIXer:FREQuency:HANDover

Commands in total: 1
Subgroups: 0
Direct child commands: 1

get() → float[source]

# [SENSe]:MIXer:FREQuency:HANDover
value: float = driver.applications.k18AmplifierEt.sense.mixer.frequency.handover.get()

Defines the frequency at which the mixer switches from one range to the next (if two different ranges are selected) . The handover frequency for each band can be selected freely within the overlapping frequency range. Is only available if the external mixer is active (see method RsFsw.applications.k50Spurious.sense.mixer.state.set() ) .

set(arg_0: float) → None[source]

# [SENSe]:MIXer:FREQuency:HANDover
driver.applications.k18AmplifierEt.sense.mixer.frequency.handover.set(arg_0 = 1.0)

Defines the frequency at which the mixer switches from one range to the next (if two different ranges are selected) . The handover frequency for each band can be selected freely within the overlapping frequency range. Is only available if the external mixer is active (see method RsFsw.applications.k50Spurious.sense.mixer.state.set() ) .