Source

SCPI Command :

OUTPut:IF[:SOURce]

class SourceCls

Source commands group definition. 1 total commands, 0 Subgroups, 1 group commands

get() → RsFsw.enums.IfSource

# SCPI: OUTPut:IF[:SOURce]
value: enums.IfSource = driver.applications.k18AmplifierEt.output.ifreq.source.get()

Defines the type of signal available at one of the output connectors of the FSW. For restrictions and more information see ‘IF and video signal output’.

return

if_source: No help available

set(if_source: RsFsw.enums.IfSource) → None

# SCPI: OUTPut:IF[:SOURce]
driver.applications.k18AmplifierEt.output.ifreq.source.set(if_source = enums.IfSource.HVIDeo)

Defines the type of signal available at one of the output connectors of the FSW. For restrictions and more information see ‘IF and video signal output’.

param if_source

IF The measured IF value is available at the IF/VIDEO/DEMOD output connector. The frequency at which the IF value is provided is defined using the method RsFsw.Applications.K9x_11ad.Output.Ifreq.IfFrequency.set command. IF2 The measured IF value is available at the ‘IF OUT 2 GHz/ IF OUT 5 GHz’ output connector at a frequency of 2 GHz. This setting is only available if the ‘IF OUT 2 GHz/ IF OUT 5 GHz’ connector or the optional 2 GHz / 5 GHz bandwidth extension (FSW-B2000/B5000) is available. It is automatically set if the optional 2 GHz / 5 GHz bandwidth extension (FSW-B2000/B5000) is installed and active. For details see ‘Basics on the R&S FSW bandwidth extensions (R&S FSW-B2000/B5000 options) ‘. VIDeo The displayed video signal (i.e. the filtered and detected IF signal, 200mV) is available at the IF/VIDEO/DEMOD output connector. This setting is required to provide demodulated audio frequencies at the output.